Selecting/Using Transparencies
Specifications
Caution!
Transparencies must be able to withstand 446°F (230°C) for 0.2 second, including mechanical pressures to 25 psi (1.8 kg/cm2).
Important!
Use only recommended transparencies.
Usable | Feed | Exit | Media Type | Media | Recommended | |
Weight | ||||||
Sizes | Tray | Tray | Setting | Transparencies | ||
Setting | ||||||
|
|
|
|
| ||
|
|
|
|
|
| |
• Letter | • Tray 1 | Rear | Transparency | Any | • OKI 52205701 | |
• A4 | • MP Tray | Only |
| (Ignored) | • 3M CG3720 | |
|
|
| ||||
|
|
|
|
| • Folex BG67 (A4) | |
|
|
|
|
|
|
Printing Transparencies
For Individual Print Jobs on Transparencies
Make the following settings in the printer driver as you print the job:
•Source = Tray1 or MP Tray
•Media Size = Letter or A4
•Media Type = Transparency
•Windows® Adobe® PostScript® driver only: deselect Media Check:
Windows 2000/XP
Printing Preferences → Advanced
→Document Options → Printer Features → Media Check = Off.
Windows Me/98/95
Properties → Setup tab → Paper Feed Options → deselect Media Check.
Windows NT 4.0
Document Defaults → Input Slot Option → Media Check = Off.
Making Transparencies the Default Print Media
Tray 1
If Tray 1 will normally be loaded with transparencies, set the printer menu as follows (see page 5):
•Tray1 MediaType = Transparency
MP Tray
If the MP Tray will normally be loaded with transparencies, set the printer menu as follows (see page 6):
•MP Tray PaperSize = Letter (the default) or A4
•MP Tray MediaType = Transparency
12
