The control panel
Function buttons
Indicator lights
On/Off button
Function push buttons: in addition to the dishwashing programme selected, the following functions can also be set with the help of these buttons:
-water softener setting,
-deactivation/activation of the rinse aid dispenser,
-the cancelling of a washing programme in progress,
-deactivation/activation of the audible signals.
Programme selection buttons: allows the selection of the desired washing programme (see "Washing programmes" chart).
Delay start button: this option allows the start of the programme to be delayed by 3, 6 or 9 hours.
Indicator lights: have the following meanings:
SALT | salt refilling indicator light, illuminates |
| when the salt has run out |
|
|
RINSE AID | rinse aid refilling indicator light, illuminates |
| when the rinse aid has run out |
|
|
END OF CYCLE | illuminates when the washing |
| programme has ended, it also has added |
| functions of visual signalling as: |
| - something not working with the machine, |
| - deactivation/activation of the audible |
| signals, |
| - the setting of the water softener. |
|
|
Programme selection
buttons
Delay start button
Audible signals
Audible signals have been introduced to help indicate which operations the dishwasher is performing:
-setting of the water softener
-end of programme
-something not working with the machine
Deactivation/activation of the audible signals
(The dishwasher must be switched off)
Factory setting: audible signals activated
1.Press the On/Off button. All programme selection buttons indicator lights will illuminate (setting mode).
If only one programme selection button indicator light is illuminated, this means that a washing programme has been selected.
The programme must be cancelled: press simultaneously the function buttons 2 and 3 for about 2 seconds, the indicator light of the set programme button starts flashing for about 2 seconds.
After about 2 seconds the indicator lights of all the programme selection buttons will illuminate indicating that the set programme has been cancelled and that the machine is now in setting mode.
2.Press simultaneously function buttons 2 and 3, the indicator lights of the function buttons 1, 2 and 3 start flashing.
3.Press the function button 3, the indicator lights of function buttons 1 and 2 turn off while the indicator light of the function button 3 goes on flashing, at the same time the END OF CYCLE indicator light illuminates indicating that the audible signals are active.
4.To deactivate the audible signals, press again the function button 3, the END OF CYCLE indicator light turns off, indicating that the audible signals have been deactivated.
5.To memorise the operation, switch off the dishwasher by pressing the On/Off button or wait about 60 seconds after which the dishwasher will automatically return to setting mode.
To activate again the audible signals simply follow the above operations until the END OF CYCLE indicator light illuminates.
5