Zanussi ZDT 6764 Installation instructions, Building-in, Levelling, Fixing to the adjacent units

Page 19

Installation instructions

Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or competent person.

Remove all packaging before positioning the machine.

If possible, position the machine next to a water tap and a drain.

Building-in

This dishwasher is designed to be fitted under a kitchen counter or worksurface.

Attention!

Carefully follow the instructions on the enclosed template for building in the dishwasher and fitting the furniture panel.

No further openings for the venting of the dishwasher are required, but only to let the water fill and drain hose and power supply cable pass through.

The dishwasher incorporates adjustable feet to allow the adjustment of the height.

During all operations that involve accessibility to internal components the dishwasher has to be unplugged.

When inserting the machine, ensure that the water inlet hose, the drain hose and the supply cable are not kinked or squashed.

Levelling

Good levelling is essential for correct closure and sealing of the door.

When the appliance is correctly levelled, the door will not catch on either side of the cabinet.

If the door does not close correctly, loosen or tighten the adjustable feet until the machine is perfectly level.

Fixing to the adjacent units

The dishwasher must be secured against tilting. Therefore make sure that the counter it is fixed under, is suitably secured to a fixed structure (adjacent kitchen units cabinets, wall).

Water supply connections

This dishwasher must be plumbed into a cold water supply.

For making the connection itself, the coupling nut fitted to the machine’s supply hose is designed to screw onto a 3/4" inch gas thread spout.

The water pressure must be within the limits given in the "Technical specifications". Your local Water Authority will advise you on the average mains pressure in your area.

The water inlet hose must not be kinked, crushed, or entangled when it is being connected up.

The inlet hose must hang down vertically from the supply tap.

The dishwasher features fill and drain hoses which can be turned either to the left or the right to suit the installation by means of the locknut. The locknut must be correctly fitted to avoid water leaks. (Attention! NOT all models of dishwashers have fill and drain hoses provided with locknut. In this case, this kind of facility is not possible).

If the machine is connected to new pipes or pipes which have not been used for a long time, you should run the water for a few minutes before connecting the inlet hose.

Do not use, for connection, old hoses which have been used in another appliance.

The dishwasher is fitted with safety devices that prevent the wash water returning into the drinking water system and comply with the applicable plumbing regulations.

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Dishwasher Contents Disposal Safety instructionsInstallation Child safetyDescription of the appliance Deactivation/activation of the audible signals Audible signalsDigital display indicates Water softener Prior to using for the first timeSetting manually BSetting electronicallyFilling with rinse aid Adjusting the doseFilling with dishwasher salt Rinse aidAre of limited suitability Daily useLoading cutlery and dishes Lower basketUpper basket Cutlery basketSo they do not move Fill with detergent Adjusting the height of the upper basketUse of detergent To move to the higher position proceed as followsCombi detergents Different kinds of detergentDetergent tablets Concentrated detergentWashing programmes Starting a washing programme Prolonged periods of non-operation Maintenance and cleaningCleaning the filters Frost precautionsFault Possible cause Solutions Flashing fault code appearsThere are problems when operating the dishwasher Fault code / malfunction Possible cause SolutionsWater drops have dried onto glasses and dishes Dishes are not cleanWash results are not satisfactory Dishes are wet and dullCustomer Care Department Service and Spare PartsTel 08705 Exclusions Guarantee ConditionsStandard guarantee conditions European GuaranteeFixing to the adjacent units Installation instructionsBuilding-in LevellingProceed as follows Water outlet hose connectionElectrical connection Green and Yellow Earth Blue- Neutral Brown- LiveCup racks position a Hints for test centresPage Page From the Electrolux Group. The World’s No.1 choice

ZDT 6764 specifications

The Zanussi ZDT 6764 stands out in the realm of modern dishwashers, showcasing a blend of efficiency, functionality, and innovative technology. With a focus on making the dishwashing experience seamless, this model caters excellently to households seeking convenience without compromising on performance.

One of the key features of the ZDT 6764 is its substantial capacity. Designed to accommodate up to 13 place settings, it is perfect for larger families or frequent entertainers. The adjustable top basket and foldable plate holders provide flexibility, allowing users to customize the interior space according to their specific needs. This makes it easy to wash everything from delicate glassware to bulky pots and pans.

The ZDT 6764 employs advanced cleaning technology to ensure sparkling results every time. Its powerful water spray system features multiple spray arms that reach every corner of the dishwasher, ensuring even the most stubborn stains are effectively tackled. Additionally, the model incorporates a dedicated "Auto" program, which intelligently adjusts the wash cycle based on the load's dirtiness, optimizing water and energy consumption.

Energy efficiency is another strong suit of the Zanussi ZDT 6764. With an A++ energy rating, it minimizes environmental impact while helping users save on their utility bills. It consistently performs well in cleaning tests while consuming less water compared to traditional dishwashers, making it an eco-friendly choice.

The ZDT 6764 is also designed for quiet operation, operating at a noise level of just 44 dB. This feature is particularly appreciated in open plan living spaces where noise can be a concern, allowing users to run the dishwasher at any time without disruption.

In terms of usability, the Zanussi ZDT 6764 boasts a simple and intuitive control panel. The user-friendly interface enables users to easily select from multiple wash programs, including a rapid cycle for when time is of the essence. Additionally, an LED display provides clear information on the current status of the wash cycle.

Lastly, the smart design includes a delay start option, meaning users can program their dishwasher to run at a more convenient time, such as during off-peak energy hours. This not only enhances flexibility but also contributes to energy savings.

In summary, the Zanussi ZDT 6764 combines practicality and advanced technology, making it a compelling choice for consumers seeking a reliable and efficient dishwasher solution. With its spacious design, excellent cleaning capabilities, and energy-saving features, it stands out as a quintessential addition to the modern kitchen.
Top Page Image Contents