Zanussi ZDT 6764 manual Water outlet hose connection, Electrical connection, Proceed as follows

Page 20

Water outlet hose connection

The end of the drain hose can be connected in the following ways:

1.To the sink outlet spigot, securing it to the underside of the work surface. This will prevent waste water from the sink running into the machine.

2.Hooked over the edge of the sink using the special curved plastic guide (if provided with the machine).

3.To a stand pipe provided with vent-hole, minimum internal diameter 4 cm.

The waste connection must be at a height of between 30 cm (minimum) and 100 cm (maximum) from the bottom of the dishwasher.

The drain hose can face either to the right or left of the dishwasher

Ensure the hose is not bent or squashed as this could prevent or slow down the discharge of water.

The sink plug must not be in place when the machine is draining as this could cause the water to syphon back into the machine.

If you use a drain hose extension it must be no longer than 2 metres and its internal diameter must be no smaller than the diameter of the hose provided.

CS18

Likewise the internal diameter of the couplings used for connections to the waste outlet must be no smaller than the diameter of the hose provided.

Attention!

Our appliances are supplied with a security device to protect against the return of dirty water back into the machine.

If the spigot of your sink has a "no return valve" incorporated this can prevent the correct draining of your dishwasher. We advise you therefore to remove it.

Electrical connection

This appliance must be earthed.

The manufacturer declines any responsibility should this safety measure not be observed.

If the plug that is fitted to your appliance is not suitable for the socket, it must be cut off and the appropriate plug fitted.

Important

The wires on the mains lead are coloured in accordance with the following code:

Green and Yellow - Earth

Blue- Neutral

Brown- Live

If you fit your own plug, the colours of the wires in the mains lead of your appliance may not correspond with the markings identifying the terminals in your plug.

Proceed as follows:

1.Connect the Green and Yellow (earth) wire to the terminal

in the plug which is marked with the letter "E" or the earth

symbol or coloured green and yellow.

2.Connect the Blue (neutral) wire to the terminal in the plug which is marked with the letter "N" or coloured black.

3.Connect the Brown (live) wire to the terminal in the plug which is marked with the letter "L" or coloured red.

E

13 A

L

N

CE04

The plug moulded onto the lead incorporates a 13amp BSI362 fuse. Only ASTA or BSI fuses should be used.

The plug must not be used if the fuse cover/carrier is lost. The cover/carrier is indicated by the coloured insert at the base of the plug.

A replacement cover/carrier must be obtained from your local Service Force Centre.

To isolate the dishwasher from mains, remove the mains plug.

Important!

The plug must still be accessible after the appliance has been installed.

The appliance should not be connected to the electrical supply by means of an extension cable.

In case that the electrical cable has to be replaced, please contact your local Service Force Centre.

20

Image 20
Contents Dishwasher Contents Safety instructions InstallationChild safety DisposalDescription of the appliance Digital display indicates Audible signalsDeactivation/activation of the audible signals Prior to using for the first time Setting manuallyBSetting electronically Water softenerAdjusting the dose Filling with dishwasher saltRinse aid Filling with rinse aidDaily use Loading cutlery and dishesLower basket Are of limited suitabilitySo they do not move Cutlery basketUpper basket Adjusting the height of the upper basket Use of detergentTo move to the higher position proceed as follows Fill with detergentDifferent kinds of detergent Detergent tabletsConcentrated detergent Combi detergentsWashing programmes Starting a washing programme Maintenance and cleaning Cleaning the filtersFrost precautions Prolonged periods of non-operationFlashing fault code appears There are problems when operating the dishwasherFault code / malfunction Possible cause Solutions Fault Possible cause SolutionsDishes are not clean Wash results are not satisfactoryDishes are wet and dull Water drops have dried onto glasses and dishesTel 08705 Service and Spare PartsCustomer Care Department Guarantee Conditions Standard guarantee conditionsEuropean Guarantee ExclusionsInstallation instructions Building-inLevelling Fixing to the adjacent unitsWater outlet hose connection Electrical connectionGreen and Yellow Earth Blue- Neutral Brown- Live Proceed as followsHints for test centres Cup racks position aPage Page From the Electrolux Group. The World’s No.1 choice

ZDT 6764 specifications

The Zanussi ZDT 6764 stands out in the realm of modern dishwashers, showcasing a blend of efficiency, functionality, and innovative technology. With a focus on making the dishwashing experience seamless, this model caters excellently to households seeking convenience without compromising on performance.

One of the key features of the ZDT 6764 is its substantial capacity. Designed to accommodate up to 13 place settings, it is perfect for larger families or frequent entertainers. The adjustable top basket and foldable plate holders provide flexibility, allowing users to customize the interior space according to their specific needs. This makes it easy to wash everything from delicate glassware to bulky pots and pans.

The ZDT 6764 employs advanced cleaning technology to ensure sparkling results every time. Its powerful water spray system features multiple spray arms that reach every corner of the dishwasher, ensuring even the most stubborn stains are effectively tackled. Additionally, the model incorporates a dedicated "Auto" program, which intelligently adjusts the wash cycle based on the load's dirtiness, optimizing water and energy consumption.

Energy efficiency is another strong suit of the Zanussi ZDT 6764. With an A++ energy rating, it minimizes environmental impact while helping users save on their utility bills. It consistently performs well in cleaning tests while consuming less water compared to traditional dishwashers, making it an eco-friendly choice.

The ZDT 6764 is also designed for quiet operation, operating at a noise level of just 44 dB. This feature is particularly appreciated in open plan living spaces where noise can be a concern, allowing users to run the dishwasher at any time without disruption.

In terms of usability, the Zanussi ZDT 6764 boasts a simple and intuitive control panel. The user-friendly interface enables users to easily select from multiple wash programs, including a rapid cycle for when time is of the essence. Additionally, an LED display provides clear information on the current status of the wash cycle.

Lastly, the smart design includes a delay start option, meaning users can program their dishwasher to run at a more convenient time, such as during off-peak energy hours. This not only enhances flexibility but also contributes to energy savings.

In summary, the Zanussi ZDT 6764 combines practicality and advanced technology, making it a compelling choice for consumers seeking a reliable and efficient dishwasher solution. With its spacious design, excellent cleaning capabilities, and energy-saving features, it stands out as a quintessential addition to the modern kitchen.