Zanussi ZDT 6764 Prior to using for the first time, Water softener, Setting manually

Page 6

Prior to using for the first time

Before using your dishwasher for the first time:

1.Ensure that the electrical and water connections comply with the installation instructions.

2.Remove all packaging from inside the appliance.

3.Set the water softener.

4.Pour 1 litre of water inside the salt container and then fill with dishwasher salt.

5.Fill the rinse aid dispenser.

The water softener

The dishwasher is equipped with a water softener designed to remove minerals and salts from the water supply, which would have a detrimental or adverse effect on the operation of the appliance.

The higher the content of these minerals and salts, the harder your water is.

Water hardness is measured in equivalent scales, Clarke degrees, French degrees (°TH) and mmol/l (millimol per litre - international unit for the hardness of water).

The softener should be adjusted according to the hardness of the water in your area. Your local Water Authority can advise you on the hardness of the water in your area.

The water softener must be set in both ways: manually, using the water hardness dial and electronically, using the function push buttons on the control panel.

a) Setting manually

1.Open the dishwasher door.

2.Remove the lower basket from the dishwasher.

3. Turn the water hardness dial to position 1 or 2 (see table).

4.Replace the lower basket.

b)Setting electronically

(The dishwasher must be switched off)

The dishwasher is factory set at level 5.

1.Press the On/Off button. The indicator lights of the programme selection buttons will illuminate and in the digital display are visible 2 horizontal lines (--) (setting mode).

If other button indicator lights are on and in the digital display is visible the number of a programme (1 - 2 - 3 etc..), this means that a washing programme has been set.

The programme must be cancelled: press simultaneously the function buttons 2 and 3 for about 2 seconds, the indicator lights of the programme selection buttons will start flashing. After about 2 seconds the indicator lights of the programme selection buttons will illuminate with a fixed light and in the digital display will appear 2 horizontal lines (--) indicating that the set programme has been cancelled and the machine is now in setting mode.

2.Press simultaneously function buttons 2 and 3, until the indicator lights of the function buttons 1, 2 and 3 start flashing.

3.Press the function button 1, the indicator lights of function buttons 2 and 3 turn off while the indicator light of the function button 1 goes on flashing, the digital display indicates the current level and a sequence of intermittent audible signals are heard.

The current level is indicated by the number visible in the display and the number of intermittent audible signals heard.

Example:

displayed + 5 audible signals = level 5.

4. To change the level, press function button 1. Each time the

The dishwasher is factory set at position 2.

AA07

button is pressed the level changes. (For the selection of

the new level see the chart).

Examples:

if the current level is 5, by pressing function button 1 once,

level 6 is selected.

if the current level is 10, by pressing function button 1 once,

level 1 is selected.

5. To memorise the operation, switch off the dishwasher by

pressing the On/Off button or wait about 60 seconds after

which the dishwasher will automatically return to setting

mode.

 

Water hardness

 

Adjusting the water

Level indicated

Number of

Use

Clarke

°TH

mmol/l

Range

hardness setting

in the

audible

of salt

manually

electronically

digital display

signals

 

 

 

 

 

 

 

 

64 - 88

91 - 125

9,0 - 12,5

IV

2

level 10

 

10

yes

53 - 63

76 - 90

7,6 - 8,9

IV

2

level 9

 

9

yes

46 - 52

65 - 75

6,5 - 7,5

IV

2

level 8

 

8

yes

36 - 45

51 - 64

5,1 - 6,4

IV

2

level 7

 

7

yes

28 - 35

40 - 50

4,0 - 5,0

IV

2

level 6

 

6

yes

23 - 27

33 - 39

3,3 - 3,9

III

2

level 5

 

5

yes

18 - 22

26 - 32

2,6 - 3,2

III

1

level 4

 

4

yes

13 - 17

19 - 25

1,9 - 2,5

II

1

level 3

 

3

yes

5 - 12

7 - 18

0,7 - 1,8

I/II

1

level 2

 

2

yes

< 5

< 7

< 0,7

I

1

level 1

 

1

no

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Dishwasher Contents Child safety Safety instructionsInstallation DisposalDescription of the appliance Audible signals Deactivation/activation of the audible signalsDigital display indicates BSetting electronically Prior to using for the first timeSetting manually Water softenerRinse aid Adjusting the doseFilling with dishwasher salt Filling with rinse aidLower basket Daily useLoading cutlery and dishes Are of limited suitabilityCutlery basket Upper basketSo they do not move To move to the higher position proceed as follows Adjusting the height of the upper basketUse of detergent Fill with detergentConcentrated detergent Different kinds of detergentDetergent tablets Combi detergentsWashing programmes Starting a washing programme Frost precautions Maintenance and cleaningCleaning the filters Prolonged periods of non-operationFault code / malfunction Possible cause Solutions Flashing fault code appearsThere are problems when operating the dishwasher Fault Possible cause SolutionsDishes are wet and dull Dishes are not cleanWash results are not satisfactory Water drops have dried onto glasses and dishesService and Spare Parts Customer Care DepartmentTel 08705 European Guarantee Guarantee ConditionsStandard guarantee conditions ExclusionsLevelling Installation instructionsBuilding-in Fixing to the adjacent unitsGreen and Yellow Earth Blue- Neutral Brown- Live Water outlet hose connectionElectrical connection Proceed as followsHints for test centres Cup racks position aPage Page From the Electrolux Group. The World’s No.1 choice

ZDT 6764 specifications

The Zanussi ZDT 6764 stands out in the realm of modern dishwashers, showcasing a blend of efficiency, functionality, and innovative technology. With a focus on making the dishwashing experience seamless, this model caters excellently to households seeking convenience without compromising on performance.

One of the key features of the ZDT 6764 is its substantial capacity. Designed to accommodate up to 13 place settings, it is perfect for larger families or frequent entertainers. The adjustable top basket and foldable plate holders provide flexibility, allowing users to customize the interior space according to their specific needs. This makes it easy to wash everything from delicate glassware to bulky pots and pans.

The ZDT 6764 employs advanced cleaning technology to ensure sparkling results every time. Its powerful water spray system features multiple spray arms that reach every corner of the dishwasher, ensuring even the most stubborn stains are effectively tackled. Additionally, the model incorporates a dedicated "Auto" program, which intelligently adjusts the wash cycle based on the load's dirtiness, optimizing water and energy consumption.

Energy efficiency is another strong suit of the Zanussi ZDT 6764. With an A++ energy rating, it minimizes environmental impact while helping users save on their utility bills. It consistently performs well in cleaning tests while consuming less water compared to traditional dishwashers, making it an eco-friendly choice.

The ZDT 6764 is also designed for quiet operation, operating at a noise level of just 44 dB. This feature is particularly appreciated in open plan living spaces where noise can be a concern, allowing users to run the dishwasher at any time without disruption.

In terms of usability, the Zanussi ZDT 6764 boasts a simple and intuitive control panel. The user-friendly interface enables users to easily select from multiple wash programs, including a rapid cycle for when time is of the essence. Additionally, an LED display provides clear information on the current status of the wash cycle.

Lastly, the smart design includes a delay start option, meaning users can program their dishwasher to run at a more convenient time, such as during off-peak energy hours. This not only enhances flexibility but also contributes to energy savings.

In summary, the Zanussi ZDT 6764 combines practicality and advanced technology, making it a compelling choice for consumers seeking a reliable and efficient dishwasher solution. With its spacious design, excellent cleaning capabilities, and energy-saving features, it stands out as a quintessential addition to the modern kitchen.
Top Page Image Contents