Zanussi ZDT 6764 manual Starting a washing programme

Page 13

Starting a washing programme

In this fully integrated appliance the controls are located on the top of the door. When selecting a programme, the door needs to be open.

Interrupt a washing programme in progress

Open the dishwasher door; the programme will stop. Close the door; the programme will start from the point at which it was interrupted.

1.Check that the baskets have been loaded correctly and that the spray arms can rotate freely

2.Turn on the water tap

3.Press the On/Off button

The indicator lights of the programme selection buttons illuminate and in the digital display are visible 2 horizontal lines (--).

4. Setting and starting the programme

To select a programme, press either one of the two programme selection buttons, the indicator lights of the programme selection buttons start to flash and the number corresponding to the last performed washing programme will appear in the digital display.

Using these two buttons you have an increasing (+) or a decreasing (-) order in the selection of the programme (see "Washing programmes" chart for the number of the programme).

Example:

Button (increasing order): 1→2→3 etc...

Button (decreasing order): 1→7→6 etc...

If desired, select the half load option (if available with the selected washing programme).

Close the dishwasher’s door, the programme will start automatically.

Setting and starting the programme with the delay start

Once the washing programme has been selected press the Delay Start button, the corresponding indicator light will illuminate and in the digital display appears 1h.

Press the delay start button until in the digital display will appear the number of hours desired (from 1 hour up to 19 hours).

Close the dishwasher door, the countdown starts automatically and will decrease with steps of 1 hour. The opening of the door will not modify or interrupt the countdown.

Once the delay start has elapsed the washing programme will start automatically.

NOTE: The start of the programme or the countdown of the delay start will occur only after the closure of the door, until this moment you can modify the selection made.

Cancel a washing programme in progress

Open the dishwasher door.

Press the function buttons 2 and 3 simultaneously for about 2 seconds, the indicator lights of the programme selection buttons will start flashing. After about 2 seconds the indicator lights of the programme selection buttons will illuminate with a fixed light and 2 horizontal lines (--) indicating that the running programme has been cancelled and that the machine has returned to setting mode, will appear in the digital display.

(If a new washing programme will be selected, check that there is detergent in the detergent dispenser).

6. To cancel a delay start in progress

To cancel a delay start in progress you have to reset the dishwasher; follow the same instructions given in "Cancel a washing programme in progress". Cancelling a delay start involves also the cancelling of the set washing programme (and eventual options).

In this case you have to set the washing programme again.

7. End of the washing programme

The dishwasher will automatically stop and an audible signal informs you of the end of the washing programme. Open the dishwasher’s door, leave it ajar and wait a few minutes before removing the dishes; in this way they will be cooler and the drying will be improved.

The End of cycle indicator light is illuminated.

The indicator light of the programme just ended remains on.

Switch off the dishwasher by pressing the On/Off button.

8. Unloading the dishwasher

Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down before removing from the appliance.

Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one.

Water may appear on the sides and the door of the dishwasher as the stainless steel will eventually become cooler than the dishes.

When the washing programme has finished, it is recommended that the dishwasher is unplugged and the water tap turned off.

5. To interrupt or cancel a washing programme in progress

Interrupt or cancel a washing programme in progress ONLY if it’s absolutely necessary.

Attention! Hot steam may escape when the door is opened. Open the door carefully.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Dishwasher Contents Installation Safety instructionsChild safety DisposalDescription of the appliance Deactivation/activation of the audible signals Audible signalsDigital display indicates Setting manually Prior to using for the first timeBSetting electronically Water softenerFilling with dishwasher salt Adjusting the doseRinse aid Filling with rinse aidLoading cutlery and dishes Daily useLower basket Are of limited suitabilityUpper basket Cutlery basketSo they do not move Use of detergent Adjusting the height of the upper basketTo move to the higher position proceed as follows Fill with detergentDetergent tablets Different kinds of detergentConcentrated detergent Combi detergentsWashing programmes Starting a washing programme Cleaning the filters Maintenance and cleaningFrost precautions Prolonged periods of non-operationThere are problems when operating the dishwasher Flashing fault code appearsFault code / malfunction Possible cause Solutions Fault Possible cause SolutionsWash results are not satisfactory Dishes are not cleanDishes are wet and dull Water drops have dried onto glasses and dishesCustomer Care Department Service and Spare PartsTel 08705 Standard guarantee conditions Guarantee ConditionsEuropean Guarantee ExclusionsBuilding-in Installation instructionsLevelling Fixing to the adjacent unitsElectrical connection Water outlet hose connectionGreen and Yellow Earth Blue- Neutral Brown- Live Proceed as followsCup racks position a Hints for test centresPage Page From the Electrolux Group. The World’s No.1 choice

ZDT 6764 specifications

The Zanussi ZDT 6764 stands out in the realm of modern dishwashers, showcasing a blend of efficiency, functionality, and innovative technology. With a focus on making the dishwashing experience seamless, this model caters excellently to households seeking convenience without compromising on performance.

One of the key features of the ZDT 6764 is its substantial capacity. Designed to accommodate up to 13 place settings, it is perfect for larger families or frequent entertainers. The adjustable top basket and foldable plate holders provide flexibility, allowing users to customize the interior space according to their specific needs. This makes it easy to wash everything from delicate glassware to bulky pots and pans.

The ZDT 6764 employs advanced cleaning technology to ensure sparkling results every time. Its powerful water spray system features multiple spray arms that reach every corner of the dishwasher, ensuring even the most stubborn stains are effectively tackled. Additionally, the model incorporates a dedicated "Auto" program, which intelligently adjusts the wash cycle based on the load's dirtiness, optimizing water and energy consumption.

Energy efficiency is another strong suit of the Zanussi ZDT 6764. With an A++ energy rating, it minimizes environmental impact while helping users save on their utility bills. It consistently performs well in cleaning tests while consuming less water compared to traditional dishwashers, making it an eco-friendly choice.

The ZDT 6764 is also designed for quiet operation, operating at a noise level of just 44 dB. This feature is particularly appreciated in open plan living spaces where noise can be a concern, allowing users to run the dishwasher at any time without disruption.

In terms of usability, the Zanussi ZDT 6764 boasts a simple and intuitive control panel. The user-friendly interface enables users to easily select from multiple wash programs, including a rapid cycle for when time is of the essence. Additionally, an LED display provides clear information on the current status of the wash cycle.

Lastly, the smart design includes a delay start option, meaning users can program their dishwasher to run at a more convenient time, such as during off-peak energy hours. This not only enhances flexibility but also contributes to energy savings.

In summary, the Zanussi ZDT 6764 combines practicality and advanced technology, making it a compelling choice for consumers seeking a reliable and efficient dishwasher solution. With its spacious design, excellent cleaning capabilities, and energy-saving features, it stands out as a quintessential addition to the modern kitchen.
Top Page Image Contents