Zanussi ZCE 631 manual Hour Clock and Timer, To SET the Time of DAY

24 hour Clock and Timer

Minute minder

Cooking duration

End of cooking time

Manual function

Cookpot symbol - This will be displayed when a programme is in operation.

AAuto symbol - This will be displayed when the

U oven has been programmed for automaticT

O operation.

Time setting knob - Turn it clockwise and hold it in the turned position to increase the time setting. Turn it anticlockwise and hold it in the turned position to decrease the time setting. The count- up or count-down speed increases the longer the knob is held in the turned position.

The electronic timer can indicate the time of day, operate as a minute minder and automatically operate the oven. Before the oven can be operated, the time of day must be set on the electronic timer.

Please note that this is a 24 hour clock. For example, 2pm is shown as 14:00.

In case of loss of power, all the settings (time of day, set programme or programme in operation), will be cancelled. When the power is restored, the numbers on the display will flash, and the ti- mer has to be reset.

ΦTO SET THE TIME OF DAY

Press button , release the button, then turn the time setting knob until the correct time of day is displayed.

ΦTO SET THE MINUTE MINDER

Press button , release the button, then turn the setting

time knob until the duration time is displayed (maximum 23 hours, 59 minutes).

Our diagram shows the timer set for 45 minutes. After a few seconds the time of day will show in the display.

To check the number of minutes remaining, press the button. At the end of the timed period an alarm will sound. To switch off the alarm press button .

Auto symbol

Cookpot

symbol

A

U

T

O

TIMER

Programming

controls

TIMER

TIMER

Time setting

8