PROGRAMMING
End of cooking numerical programmer (Fig. 7) Some models are fitted with a device which switches off the oven at the end of the cooking time programmed.
The programmer has an electric clock which shows the time and a timer with an acoustic signal.
Fig. 7 shows the programmer commands. All regulations are carried out by means of switches A and B.
Switch A
Turn in a clockwise direction to correct the time shown on the numerical display (on installaton, after electricity cut, if it is in advance or behind, etc.).
Switch B
Turn the switch in a clockwise direction to select: Cooking time (max. 210 minutes);
Interruption of the acoustic signal (position 
);
Manual use of the oven (position 
); Corresponding symbols appear on screen C.
C
FO 0158 | A B | |
Fig. 7 | ||
|
Manual operation
The oven can be used normally, without any programming. For this, turn switch B in a clockwise direction until the symbol 
appears in the window.
Programming
Prepare the dish to be cooked; turn switch B in a clockwise direction to regulate the cooking time (in minutes) (window C).
Turn the oven switch to regulate the cooking time. An acoustic signal indicates the end of cooking time; to cancel the acoustic signal, turn switch B to display
symbol 
in window C.
62