American Power Conversion AP9615 manual Shut down and power off the connected, Equipment, Panel

Installing the Hub		continued
Installation	Matrix-UPS™
procedure,	a	Shut down and power off the connected
continued		equipment.
	b	Turn off the circuit breaker on the bottom left
		side on the back panel of the UPS.
	Symmetra™ Power Array™
	a	Shut down and power off the connected
		equipment.
	b	Turn off the System Enable switch on the
		bottom left side on the back panel of the UPS.
	Smart-UPS®DP
	a	Shut down and power off the connected
		equipment.
	b	Turn off the ON/OFF switch on the front
		panel.
	Triple Chassis for Silcon DP300E Series UPSs
	a	Shut down and power off the connected equip-
		ment.
	b	If present, unplug the Triple Chassis’s power
		supply from the AC power outlet.
	c	Disconnect the cable attached to the To UPS
		port on the Triple Chassis.

2 Unpack the 5 Port 10Base-T Hub. The shipping materials are recyclable. Please save, reuse, or dis- pose of them appropriately.

Handle the 5 Port 10Base-T Hub by the front panel. Do not touch the exposed printed cir- cuit board or components. Touching the circuit board or components may result in damage to the hub.

Continued on next page

6