2.2Signal cable connection
Plug one connector of the signal cable into the VGA or DVI port and lock the two bolts to ensure firm grounding.Then plug the other one into the monitor and lock the two bolts.
2.3Power cord connection
Plug one side of the power cord into the AC adapter and the other side into AC power source outlet, then plug the output side of the AC adapter into the power port at the side of monitor.
2.4Audio cable connection
Plug one side of the audio cable into the PC audio port, then plug the other side into the audio port of the monitor.
2.5Power on
Switch on the power to both the monitor and your computer.After the monitor is power on,the LED lights up green or blue. If the LED becomes red and flashing, please check the video signal cable connection.If the LED is off, please press power switch slightly.
2.6Self test pattern
If there is no horizontal or vertical sync.signal, your monitor will display Fig.3 to Indicate no signal input.After a few seconds, the monitor will come into waiting and saving power mode;if the monitor receives the video signal,it will return to the normal mode.
＋
Power
LED Indicator
－
AUTO
Fig.3 | Fig.4 |
5
