Port 10Base-T Hub | American Power Conversion AP9615 instruction

5Port 10Base-T Hub

AP9615

®

Image 1

American Power Conversion AP9615 manual Port 10Base-T Hub

Contents

Port 10Base-T Hub Thank You Contents Page LAN by installing it in the SmartSlot of an APC UPS or SmartSlot 5-Port 10Base-T Hub is an APC accessoryIntroduction That allows you to expand or create a local area network Product Description Label Color Activity Description For a description of the conditions indicated by LEDs Munication cable for each device to be attached Ways, as shown in Figure Installing the Hub Turn off the System Enable switch on Shut down and power off the connectedTurn off the ON/OFF switch on the front If present, unplug the Triple Chassis’s power Screws fastening the SmartSlot cover plate to Use a #2 Phillips head screwdriver to removeBack panel of the UPS or triple chassis. Keep Screws for below. Save the SmartSlot cover Procedure listed below Using straight-through UTP cables, connect the StaPlug the UPS back into the AC power outlet Press and hold the Power On button until you Installation Procedure Use of a crossover cable to connect the Uplink ports As many as 32 stations, as shown below in . Note2 central hubs Removing the Hub Provides suggestions for troubleshooting your hub TroubleshootingAction Cause Solution Troubleshooting Suggestions Port 10Base-T Hub Specifications Warranty Information Be prepared to provide a description of the problem ProcedureTechnician will help solve the problem over Authorization RMA number Directives Standards to Which Application of CouncilConformity is Declared W. a p c c . c o m