Figure 3. Inserting Tablet PC into HEC
Installing a Screen Protector
1.To ensure good adhesion, clean the exterior surface of the HEC window with a soft cotton cloth dampened with isopropyl alcohol before installing the screen pro- tector. If streaking occurs, gently buff the surface with a clean, soft cloth.
2.Peel the protective film from the adhesive side of the screen protector as shown in Figure 4.
3.Apply the screen protector with the adhesive side down and the notch in the lower left corner as shown in Figure 5. Apply pressure along the edges of the screen protector with your finger. Avoid lifting the screen protector from the display window after it is installed. The adhesive requires 48 hours to cure completely.
4
