Removing the Hub
Removal | To remove the 5 Port | |
procedure | steps in the order given. | |
| 1 | Disconnect all cables from the hub. |
| 2 | Turn off the UPS or device that houses the hub. (For |
|
| detailed instructions, see “Installation procedure” on |
|
| page 5.) |
| 3 | Use a #2 Phillips head screwdriver to remove the 2 |
|
| screws fastening the hub to the UPS or triple chassis. |
|
| Keep the screws for Step 6 below. |
| 4 | Carefully grasp the sides of the hub’s front panel and |
|
| gently pull the hub from the SmartSlot. |
|
| Handle the 5 Port |
|
| panel. Do not touch the exposed printed cir- |
|
| cuit board or components. Touching the |
|
| circuit board or components may result in |
|
| damage to the hub. |
| 5 | Place the hub into its original packaging or other |
|
| |
| 6 | Replace the SmartSlot coverplate (removed during |
|
| installation of the hub) with the screws removed in |
|
| Step 3. |
|
|
|
11
