Zanussi Cleaning the outside of the appliance, Cleaning the solid hob ZKS5010, Hob Surface

Page 22

Cleaning the outside of the appliance

Do not use abrasive cleaning materials e.g. abrasive cream cleaners, wire wool pads or scourers on painted or printed finishes as damage may occur. Regularly wipe over the control panel, control knobs, handles, doors and appliance sides using a soft cloth and hot soapy water. To prevent streaking, finish with a soft cloth.

Stainless Steel cream cleaners are abrasive and should be avoided as they may dull the surface finish. Any spillage on the stain- less steel finish must be wiped off immediately.

WARNING!

Do not attempt to remove any of the control knobs from the appliance as this may cause damage and is a safety hazard.

Cleaning the solid hob (ZKS5010 )

Clean the hob after each use. To ensure the best results from your hob and to prolong its good looks regular cleaning and maintenance is essential. Cleaning and maintenance should only be carried out when the hob is cool.

Hob Surface

Hob surface should be cleaned with a lukewarm solution of water and a mild detergent, periodically it may be necessary to use a mild scouring agent. Dust, fat and liquids from food that has boiled over must be removed as soon as possible. Never use a scouring pad on the

22

hob surface and on no occasion use a sharp object.

Scratched or clipped surface cannot be re- paired. In additional to the unsightly appear- ance this may lead to grooves appearing and eventually the enamel to crack.

Plates

To clean solid plates, firstly wipe off any excess spillage and if necessary clean the plates with a light abrasive pad than dry the plates thoroughly.

General information

Drying may be facilitated by turning the plates onto the lowest setting for a short time until dry.

Do not put any damp or wet items on the hotplates.

Dry pots and pans with a cloth before placing them on the hotplates.

Cleaning the ceramic hob (ZKC5020S1/W1/X1- ZKC5030W1/S1/X1/ K1)

Make sure the ceramic glass is cool before cleaning. It is important to clean the ceramic hob daily to prevent foodstuff being burnt on.

Take care to avoid the hob trims when clean- ing the ceramic glass as they may be dam- aged by the cleaning agents.

Image 22
Contents Cooker Contents Installation Safety instructionsGeneral safety Child safetyCleaning and maintenance Description of the appliance Product descriptionControls and their functions Rating plate Control panel indicator neonsBefore first use Preparing to use your applianceGrill and oven furniture CookwareTo set the time of day Electronic timer ZKC5030W1/S1/X1/K1Setting the oven timer control To set the countdownSetting the Finish Time Setting the Desired Cooking PeriodSetting the Cooking Period and Finish Time Hob Using the hobRecommended saucepans Hints and tips when using the hob Grill pan and handle Using the grillGrill ZKS5010W1/S1/B1-ZKC5020S1/W1/X1 Hints and tipsGrilling chart FoodGrill Function Using the Top OvenTop oven ZKC5030W1/S1/X1/K1 Double Grilling FunctionTo fit the top oven shelf Main ovenPreheating Hints and tips Using the main ovenDefrost Using slow cook Slow Cook FunctionOven cooking chart Cooking tablesRoasting chart Cooking timeCleaning materials Care and cleaningReplacing the light bulb Hob Surface Cleaning the outside of the applianceCleaning the solid hob ZKS5010 PlatesTo remove burnt on foodstuff Daily cleaningTo remove more stubborn marks To remove discolourations or white and silver marksCleaning the doors Cleaning the grill/oven furnitureCleaning inside the grill and oven compartments Cleaning between the outer and inner door glassRemoval of inner Glasses if applicable Problem What to do ifAdjustment of levelling feet InstallationInstallation instructions Connecting to the electricity supplyTechnical Data Technical Specifications for Top and Main OvenGuarantee/Customer Service Environmental InformationExclusions European Guarantee Page Page Page Page 892 930 005-A-04022008-01