Electrical connections, Permanent Connection

Electrical connections

Any electrical work required to install this hob should be carried out by a qualified electrician or competent person, in accordance with the current regulations.

THIS HOB MUST BE EARTHED.

The manufacturer declines any liability should these safety measures not be observed.

This hob is designed to be connected to a 230 V 50 Hz AC electrical supply.

Before switching on, make sure the electricity supply voltage is the same as that indicated on the hob rating plate. The rating plate is located on the bottom of the hob. A copy is attached on the back cover of this book.

The hob is supplied with a 3 core flexible supply cable incorporating a 3amp plug fitted. In the event of having to change the fuse, a 3amp ASTAapproved (BS 1362) fuse must be used.

Should the plug need to be replaced for any reason, the wires in the mains lead are coloured in accordance with the following code:

Green and Yellow	- Earth
Blue	- Neutral
Brown	- Live

)— Connect the green and yellow (earth) wire to the terminal in the plug which is marked with

the letter 'E' or the earth symbol or coloured green and yellow.

—Connect the blue (neutral) wire to the terminal in the plug which is marked with the letter 'N' or coloured black.

—Connect the brown (live) wire to the terminal in the plug which is marked with the letter 'L' or coloured red.

Upon completion there must be no cut, or stray strands of wire present and the cable clamp must be secure over the outer sheath.

A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure that the cut off plug is disposed of safely.

Permanent Connection

In the case of a permanent connection, it is necessary that you install a double pole switch between the hob and the electricity supply (mains), with a minimum gap of 3 mm. between the switch contacts and of a type suitable for the required load in compliance with the current electric regulations.

The switch must not break the yellow and green earth cable at any point.

Ensure that the hob supply cable does not come into contact with surfaces with temperatures higher than 50 deg. C.

FO 0390

ZGL 62 ITX specifications

The Zanussi ZGL 62 ITX is an innovative built-in gas hob that boasts a blend of style, functionality, and cutting-edge technology. Designed for the modern kitchen, this appliance caters to both cooking enthusiasts and everyday users alike, delivering an outstanding culinary experience.

One of the standout features of the ZGL 62 ITX is its four gas burners, providing versatility for various cooking techniques. Each burner is engineered to provide precise heat control, which is essential for tasks that require exact temperatures, such as simmering sauces or frying meats. The burners are designed with different power outputs, accommodating everything from gentle simmering to intense boiling.

Safety is a significant consideration in the design of the ZGL 62 ITX. It incorporates a flame failure safety device, a crucial feature that ensures the gas supply is cut off automatically if the flame is accidentally extinguished. This technology gives users peace of mind, focusing on their cooking without worrying about safety hazards.

The ignition system of the ZGL 62 ITX adds to its convenience. With a simple push-and-turn control mechanism, users can ignite the burners with ease, eliminating the need for matches or lighters. This system is designed for quick access, allowing busy cooks to get started on their meals without delay.

In terms of aesthetics, the Zanussi ZGL 62 ITX features a sleek and modern design, with a stylish stainless-steel finish that complements various kitchen decors. The surface is not only beautiful but also practical, as it is easy to clean and maintain. The burners are equipped with enamel supports that provide stability for pots and pans while also being resilient against wear and tear.

Installing the ZGL 62 ITX is straightforward, thanks to its built-in design that fits seamlessly into standard kitchen cabinetry. The control knobs are positioned at the front for easy access, ensuring that users do not have to reach over hot pots and pans during cooking.

Overall, the Zanussi ZGL 62 ITX embodies a perfect harmony of innovative features and stylish design. Whether preparing a simple meal or an elaborate feast, this gas hob offers the reliability, safety, and control that home chefs need, making it an excellent addition to any kitchen. With its combination of function, safety features, and elegant design, the ZGL 62 ITX represents an ideal choice for those who value performance in their culinary endeavors.