Zanussi ZGL 62 ITX manual Wiring Diagram, Fault Finding, Preliminary Electrical Systems Check

Page 13

Wiring Diagram

A. TAPS IGNITOR SWITCHES

B. IGNITOR UNIT

Fault Finding

Preliminary Electrical Systems Check

Brown Blue

Blue

Brown Green

Yellow

START

Isolate appliance and carry out:

A:Earth Continuity check.

PLUG (with cover removed)

SOCKET

 

(face view)

Earth Wire

(

)

 

 

Green/Yellow

E (

)

 

 

FUSE

Neutral Wire

 

 

 

 

 

 

 

Blue

 

 

 

 

 

 

N

 

L

NO

YES

Carry out:

Carry out:

 

Electricity supply

D: Resistance to

 

 

should now be

 

 

 

C: Polarity check.

 

 

 

 

 

 

Earth check.

 

satisfactory.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Has inlet fuse blown?

NO

YES

Inlet wiring faulty. Rectify any fault.

A. EARTH CONTINUITY CHECK - Appliance must be electrically disconnected - meter set on Ω (Ohms) x 1 scale and adjust zero if necessary.

a)Test leads from any appliance earth point to earth pin on plug. Resistance should be less than 0.1 Ω (Ohm), check all earth wires for continuity and all contacts are clean and tight.

B. INSULATION CHECK - Appliance electrically disconnected, all switches ON.

a)meter set on Ω (Ohms) x 1 scale.

Test leads from L to N in appliance terminal block. If meter reads «0» then there is a short circuit.

b)meter set on Ω (Ohm) x 100 scale.

Repeat test with leads from L to E. If meter reads less than ∞ (infinity) there is a fault.

Isolate appliance and carry out:

B:Insulation check. Rectify any fault including replacing fuses as necessary.

NOTE - Should it be found that the fuse has failed but no fault is indicated - a detailed continuity check (i.e. by disconnecting and checking each component) is required to trace the faulty component.

It is possible that a fault could occur as a result of local burning/arcing but no fault could be found under test. However a detailed visual inspection should reveal evidence of burning around the fault.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents GAS HOB ZGL 62 ITX Installation Important Safety InformationChild Safety ServiceContents Description of the Hob Hob burners OperationHob Top Maintenance and CleaningPan Supports BurnersSomething Not Working? Symptom SolutionEngineers technical data Instructions for the InstallerProvision for ventilation Important safety requirementsLocation Gas Connection InstallationCut Out Size Building over a cupboard or drawer BuildingBuilding over a kitchen unit with door Fitting the Hob into the worktopPermanent Connection Electrical connectionsFault Finding Wiring DiagramPreliminary Electrical Systems Check Ignition System / Gas Ignition Commissioning To adjust the gas rateConversion from Natural Gas to LPG Customer Care Service and Spare PartsEuropean guarantee Page Page 35687-8002 11/06

ZGL 62 ITX specifications

The Zanussi ZGL 62 ITX is an innovative built-in gas hob that boasts a blend of style, functionality, and cutting-edge technology. Designed for the modern kitchen, this appliance caters to both cooking enthusiasts and everyday users alike, delivering an outstanding culinary experience.

One of the standout features of the ZGL 62 ITX is its four gas burners, providing versatility for various cooking techniques. Each burner is engineered to provide precise heat control, which is essential for tasks that require exact temperatures, such as simmering sauces or frying meats. The burners are designed with different power outputs, accommodating everything from gentle simmering to intense boiling.

Safety is a significant consideration in the design of the ZGL 62 ITX. It incorporates a flame failure safety device, a crucial feature that ensures the gas supply is cut off automatically if the flame is accidentally extinguished. This technology gives users peace of mind, focusing on their cooking without worrying about safety hazards.

The ignition system of the ZGL 62 ITX adds to its convenience. With a simple push-and-turn control mechanism, users can ignite the burners with ease, eliminating the need for matches or lighters. This system is designed for quick access, allowing busy cooks to get started on their meals without delay.

In terms of aesthetics, the Zanussi ZGL 62 ITX features a sleek and modern design, with a stylish stainless-steel finish that complements various kitchen decors. The surface is not only beautiful but also practical, as it is easy to clean and maintain. The burners are equipped with enamel supports that provide stability for pots and pans while also being resilient against wear and tear.

Installing the ZGL 62 ITX is straightforward, thanks to its built-in design that fits seamlessly into standard kitchen cabinetry. The control knobs are positioned at the front for easy access, ensuring that users do not have to reach over hot pots and pans during cooking.

Overall, the Zanussi ZGL 62 ITX embodies a perfect harmony of innovative features and stylish design. Whether preparing a simple meal or an elaborate feast, this gas hob offers the reliability, safety, and control that home chefs need, making it an excellent addition to any kitchen. With its combination of function, safety features, and elegant design, the ZGL 62 ITX represents an ideal choice for those who value performance in their culinary endeavors.
Top Page Image Contents