Zanussi ZGL 62 ITX manual Operation, Hob burners

Page 5

Operation

Hob burners

)To light a burner:

z push the electric ignition pushbutton which is marked by a little spark.

z at the same time turn the relevant control knob anticlockwise to maximum position andkeep it pushed down about 5 seconds.

This will allow the "thermocouple" (see diagram - letter D) to be heated and the safety device to be switched off, otherwise the gas supply would be interrupted.

z then, check the flame is regular and adjust it as required.

If you cannot light the flame even after several attempts, check the "cap" and “crown” (see diagram - letter A and B) are in the correct position.

To put the flame out, turn the knob to the symbol z.

When switching on the mains, after installation or a power cut, it is quite normal for the spark generator to be activated automatically.

To ensure maximum burner efficiency, you should only use pots and pans with a flat bottom fitting the size of the burner used (see table).

Burner

minimum

maximum

 

diameter

diameter

 

 

 

Large (rapid)

180 mm

260 mm

Medium (semi-rapid)

120 mm

220 mm

Small (auxiliary)

80 mm

160 mm

 

 

 

If you use a saucepan which is smaller than the recommended size, the flame will spread beyond the bottom of the vessel, causing the handle to overheat.

Take care when frying food in hot oil or fat, as the overheated splashes could easily ignite.

As soon as a liquid starts boiling, turn down the flame so that it will barely keep the liquid simmering.

If the control knobs become difficult to turn, please contact your local Service Force Centre.

A - Burner cap B - Burner crown

C - Ignition electrode D - Thermocouple

5

Image 5
Contents GAS HOB ZGL 62 ITX Installation Important Safety InformationChild Safety ServiceContents Description of the Hob Hob burners OperationHob Top Maintenance and CleaningPan Supports BurnersSomething Not Working? Symptom SolutionEngineers technical data Instructions for the InstallerLocation Important safety requirementsProvision for ventilation Cut Out Size InstallationGas Connection Building over a cupboard or drawer BuildingBuilding over a kitchen unit with door Fitting the Hob into the worktopPermanent Connection Electrical connectionsPreliminary Electrical Systems Check Wiring DiagramFault Finding Ignition System / Gas Ignition Conversion from Natural Gas to LPG To adjust the gas rateCommissioning Customer Care Service and Spare PartsEuropean guarantee Page Page 35687-8002 11/06

ZGL 62 ITX specifications

The Zanussi ZGL 62 ITX is an innovative built-in gas hob that boasts a blend of style, functionality, and cutting-edge technology. Designed for the modern kitchen, this appliance caters to both cooking enthusiasts and everyday users alike, delivering an outstanding culinary experience.

One of the standout features of the ZGL 62 ITX is its four gas burners, providing versatility for various cooking techniques. Each burner is engineered to provide precise heat control, which is essential for tasks that require exact temperatures, such as simmering sauces or frying meats. The burners are designed with different power outputs, accommodating everything from gentle simmering to intense boiling.

Safety is a significant consideration in the design of the ZGL 62 ITX. It incorporates a flame failure safety device, a crucial feature that ensures the gas supply is cut off automatically if the flame is accidentally extinguished. This technology gives users peace of mind, focusing on their cooking without worrying about safety hazards.

The ignition system of the ZGL 62 ITX adds to its convenience. With a simple push-and-turn control mechanism, users can ignite the burners with ease, eliminating the need for matches or lighters. This system is designed for quick access, allowing busy cooks to get started on their meals without delay.

In terms of aesthetics, the Zanussi ZGL 62 ITX features a sleek and modern design, with a stylish stainless-steel finish that complements various kitchen decors. The surface is not only beautiful but also practical, as it is easy to clean and maintain. The burners are equipped with enamel supports that provide stability for pots and pans while also being resilient against wear and tear.

Installing the ZGL 62 ITX is straightforward, thanks to its built-in design that fits seamlessly into standard kitchen cabinetry. The control knobs are positioned at the front for easy access, ensuring that users do not have to reach over hot pots and pans during cooking.

Overall, the Zanussi ZGL 62 ITX embodies a perfect harmony of innovative features and stylish design. Whether preparing a simple meal or an elaborate feast, this gas hob offers the reliability, safety, and control that home chefs need, making it an excellent addition to any kitchen. With its combination of function, safety features, and elegant design, the ZGL 62 ITX represents an ideal choice for those who value performance in their culinary endeavors.