Technical specification
Model | ZF711W |
Net volume | 286 l |
|
|
Width | 595 mm |
|
|
Height | 1800 mm |
|
|
Depth | 600 mm |
|
|
Energy consumption | 431 kWh/year |
|
|
Energy class | B |
|
|
Rated power | 120 W |
|
|
Freezing capacity | 28 kg/24 hours |
Installation
Unpacking
Unpack the cabinet and check that it is in good condition and free of any transport damage. Notify the dealer immediately of any damage. Hand the packaging over for recycling.
GB
GB
Do not allow children to play with the packaging. The plastic film can cause suffocation.
Cleaning
Wash the inside of the cabinet using lukewarm water and bicarbonate of soda (5 ml to 0,5 litre of water).
Do not use soap or detergent as the smell may linger. Dry thoroughly.
Installing the cabinet
To obtain the best performance from the cabinet, ensure :
·the cabinet is placed in a dry, cool place and is not exposed to direct sunlight.
·the cabinet is not placed close to a source of heat, e.g. a cooker or dishwasher.
·the cabinet is level. The cabinet should not lean against any wall. If necessary adjust the
feet using the adjustment spanner supplied.
·there is good air circulation around the cabinet
and that the air channels below and behind the cabinet are not blocked. The ventilation space above the cabinet must be at least 4 cm.
The ventilation space can either be
a)directly above the cabinet, or
b)behind and above the top cupboard. In this case, the space behind the cupboard must be at least 50 mm deep.
Cabinet is placed at a location whose ambient temperature corresponds to the climate classification*, for which the appliance is designed.
*See on the rating plate on the inside of the appliance.
The following table shows which ambient temperature is correct for each climate classification.
a) | b) | 50mm |
Zanussi 818 15
14