Sangean Electronics HDT-1 user manual Troubleshooting, Issue Possible Causes Possible Solutions

Page 19

Troubleshooting

Issue

Possible Causes

Possible Solutions

Power Won’t Turn On

AC Power Cable is not properly connected

Check AC power cord connection

 

AC Outlet power not turned on

Check circuit breakers/fuses

 

Defective/Malfunctioning Unit

Call Sangean Service Department at 888-SANGEAN

Remote Doesn’t Work

Remote Battery Not Activated

Remove plastic piece located at bottom of remote

 

Battery is Dead

Replace battery

 

 

 

 

IR Sensor Obstructed

Check the area of the IR sensor and ensure there are no

 

 

obstructions and the area surrounding it is clean by using a

 

 

glass or all purpose cleaner

 

IR Sensor Malfunctioning

Call Sangean Service Department at 888-SANGEAN

 

Remote is Defective

Call Sangean Service Department at 888-SANGEAN

 

 

 

I don’t hear any audio

Power is not on

Check “Power won’t turn on”

I only hear audio in one speaker

Audio cables are not properly connected

Check to make sure audio cables are properly connected.

 

 

Make sure Left is Left, and Right is Right.If using optical,

 

 

make sure cable is not bent or kinked.

 

AV Receiver is not powered on

Check to make sure power is connected and retry

 

AV Receiver is not set to proper input

Make sure to set your AV Receiver to corresponding inputs

 

 

used during installation

 

 

 

 

Speakers improperly connected

Check speakers to make sure that they are all properly

 

 

connected

I only hear static

Antenna not connected properly

Check all antennas to ensure proper connection

 

Tuner not tuned to a station

Check to see that you are on a frequency that is broadcasting

 

 

in your area

 

 

 

 

Station is temporarily not broadcasting

Call station engineer, or try another station

 

 

 

Poor audio quality

Bad/Improper Connections

Check to make sure you are using the proper cables for the

 

 

inputs you chose.

 

 

Check to verify that all connections are to same format (RCA is

 

 

to RCA, Coaxial is to Coaxial, Antenna to Antenna input, etc.)

 

 

 

 

 

18

20070425_HDT-1&HDT-1X_381R20S-A.p6521

2007/4/30, ¤U¤È 01:44

Image 19
Contents HD RadioTM Component Tuner 2007/4/30, ¤U¤È Important Safety Instructions Main Unit Controls Front & Remote Control20070425HDT-1&HDT-1X381R20S-A.p657 Main Unit Controls Rear Accessories 20070425HDT-1&HDT-1X381R20S-A.p6510 Getting started Navigating the Display 20070425HDT-1&HDT-1X381R20S-A.p6513 Selecting the radio band Radio ControlsDirect Tuning Manual TuningReceiving Multicast Stations Receiving HD radio stationsSeek Function Using AM and FM presetsHD Seek function Recall preset stations Exchange preset stations positionAdvanced Information Menu Option Function Controls Advanced Menu OptionsIssue Possible Causes Possible Solutions TroubleshootingForce Analog setting to on Specifications UI KEY function HDT-1/HDT-1X Brief User InterfaceFM1 BFM2

HDT-1 specifications

The Sangean Electronics HDT-1 is a sophisticated HD radio tuner that brings an array of advanced features and technologies to the world of audio broadcasting. Designed for audiophiles and casual listeners alike, the HDT-1 combines high-definition radio capabilities with user-friendly functionality, ensuring an elevated listening experience.

One of the standout features of the HDT-1 is its ability to receive both analog FM/AM signals and digital HD Radio broadcasts. This dual capability allows users to enjoy a wide range of stations with enhanced sound quality and reduced interference. HD Radio technology provides crystal-clear audio reproduction, bringing out the full dynamic range of music and spoken word programming. The HDT-1 also offers additional multicast channels, enabling listeners to access a variety of content that goes beyond traditional radio offerings.

The user interface of the Sangean HDT-1 is designed with ease of use in mind. It features a large backlit LCD display that shows station details, signal strength, and program information, making navigation simple and intuitive. The unit is equipped with a rotary knob for tuning, along with a set of preset buttons for quick access to favorite stations. Additionally, it supports RDS (Radio Data System) functionality, which provides real-time information such as song titles and artist names, further enriching the listening experience.

Connectivity is another strong point of the HDT-1. It comes with a range of output options, including analog RCA outputs and a digital optical output, allowing for seamless integration with various audio systems. The built-in USB port provides a convenient connection for firmware upgrades, ensuring that the device stays updated with the latest features and improvements.

The design of the Sangean HDT-1 is both elegant and practical. Its compact form factor makes it suitable for any setting, whether it’s used in a home audio system or a portable setup. The robust build quality ensures longevity, while the sleek finish adds a touch of modernity to any space.

In summary, the Sangean Electronics HDT-1 is an exceptional HD radio tuner that delivers high-quality audio, user-friendly navigation, versatile connectivity, and a stylish design. Whether you are a dedicated radio enthusiast or simply looking for a reliable way to enjoy your favorite broadcasts, the HDT-1 stands out as a top choice in today’s market.