ENGLISH
Adjusting the tone (bass and treble)
8. Adjust the tone as desired.
When adjusting the bass
or
When adjusting the treble
or
•Each time the buttons are pressed, the tone (BASS and TRBL) can be adjusted within the range of
Notes :
•When the tone direct function is activated, the tone mode cannot be entered and “TON DIR” flickers for 3 seconds.
•Extreme settings at high volume may damage your speakers.
•In general, the bass and treble levels are adjusted to 0.
9. To listen to a program source without the tone effect.
or
•“TON DIR” is displayed, “DIRECT” lights up and the sound that bypasses the tone circuitry will be heard.
•To cancel the tone direct function, press this button again to display “TON CTRL”, and then “DIRECT” goes off.
Adjusting the sound volume balance
10. Adjust the sound volume balance between the left and right speakers.
or
•Each time the buttons are pressed, the balance level can be adjusted within the range of L 10~R 10.
Note : In general, the balance level is adjusted to 0.
18