3. Select the desired input source.
or |
•Each time the INPUT SELECTOR knob is rotated, the input source is changed as follows:
TUNER | PHONO | AUX 2 | AUX 1 |
(Frequency display)
BT-IN CD TAPE DVD AUX
4. Operate the selected component for playback.
5. Adjust the volume to a comfortable listening level.
or
6. To mute the sound.
or
•“MUTE” flickers.
•To resume the previous sound level, press this button again.
•When adjusting the volume, the mutting effect is turned off.
7.To listen with the headphones.
•Be sure to switch off all the speakers installed in the main room.
Note : Be careful not to set the volume too high when using headphones.
ENGLISH
17