TROUBLESHOOTING
Problem |
| Possible Solution |
Curb Machine will not turn on. | 1. Make sure the Power Switch is in its “ON” position. | |
| 2. | Make sure to use the proper size extension cord. |
| 3. | Make sure the extension cord is connected to a working, 115 |
|
| volt, grounded, electrical outlet. |
| 4. | Have a qualified service technician examine the machine. |
Curb Machine extrudes poorly. | 1. Make sure to properly mix the cement, sand, and water. | |
| 2. | Make sure the Slip Form is properly attached to the machine. |
| 3. | Make sure to properly feed the Hopper. |
| 4. | Make sure the Compaction Ram is moving freely on its Track. |
| 5. | Make sure the Crank Arm has been properly adjusted (length |
|
| and stroke of the Compaction Ram) for the job at hand. |
| 6. | Have a qualified service technician examine the machine. |
|
|
|
SKU 94634 | For technical questions, please call | PAGE 20 |
