SPECIFIC SAFETY RULES
1.Maintain labels and nameplates on the Curb Machine. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replace- ment.
2.Always wear safety impact eye goggles, heavy work gloves, a dust mask or respirator,
3.Maintain a safe working environment. Keep the work area well lit. Make sure there is adequate surrounding workspace. Always keep the work area free of ob- structions, grease, oil, trash, and other debris. Do not use a power tool in areas near flammable chemicals, dusts, and vapors. Do not use this product in a damp or wet location.
4.Avoid unintentional starting. Make sure you are prepared to begin work before turning on the Curb Machine.
5.Do not force the Curb Machine. This tool will do the work better and safer at the speed and capacity for which it was designed.
6.WARNING! Avoid accidental cuts. Keep hands and fingers away from the Hopper and Chute areas of the Curb Machine.
7.Never leave the Curb Machine unattended when it is plugged into an electrical outlet. Turn off the tool, and unplug it from its electrical outlet before leaving.
8.Make sure the Curb Machine is used on a dry, flat, level, ground surface. Avoid steep inclines where the Curb Machine could possibly tip over.
9.Industrial applications must follow OSHA guidelines.
10.Never stand on the Curb Machine. Serious injury could result if the machine is tipped over.
11.Check the Hopper and Chute of the Curb Machine for unwanted debris be- fore each use. Before plugging in, make a visual check to ensure the Hopper and Chute are empty.
12.Never attempt to remove material stuck in the moving parts of the Curb Ma- chine when it is plugged into an electrical outlet.
13.Allow the Motor of the Curb Machine to reach full speed before feeding con- crete into the Hopper. When turning off the Curb Machine, allow the Motor to stop on its own.
SKU 94634 | For technical questions, please call | PAGE 5 |
