Sherwood ST-670, VR-670, ASW-670 manual Changing the Camera Angle DVD Video only

CHANGING THE CAMERA ANGLE [DVD Video only]

•Some DVD Videos contain scenes which have been shot simultaneously from multiple camera angles. For these discs, the same scene can be viewed from each of these different angles.

•The recorded angles differ depending on the disc used.

•During playback at the scene recorded from multiple camera angles, press the ANGLE button.

• During playback at the scene recorded from multiple camera

angles, the angle symbol( ) is displayed on the TV screen only when the ANGLE MARK is set to ON.(Refer to “When selecting the Angle Mark” on page 34.)

•Each time this button is pressed, the angle changes as follows: Example)

Note :

• This function works only at scenes recorded from multiple angles.

ZOOMING IN/OUT A SCENE [DVD Video only]

•In the zoom-in mode only, you can select and view any part of the scene close-up. During playback or in the still picture mode, press the ZOOM button.

1 • The unit zooms in to the center part of the scene or zooms

out the scene depending on the selected zoom mode.

• Each time this button is pressed, zoom scale changes as follows:

Only while zooming in a scene, press the CURSOR	/ / / buttons to select and to view the desired part of
2 the scene close-up.	• To return to the previous operation status, press the
	ZOOM button repeatedly until the zoom playback is
	canceled.

Note:

• Depending on some operation status such as playback of DVD Video by using a title or DVD menu, etc., the zoom playback does not work.

ENGLISH

31