Initial Settings
The initial settings of the unit at the factory can be modified as desired later.
Even after the power of the unit is switched to the standby mode, the initial settings are stored in memory until it is changed the next time.
In the stop mode, press the SETUP button to enter the setup mode.
1 | • The general setup menu appears on the TV screen. |
| • To exit from the setup mode, press the SETUP button, or |
| press the CURSOR / buttons to select “Exit Setup |
| Menu” and press the ENTER button. |
| • When the disc tray is open, you can enter the setup |
| mode. |
Press the CURSOR | / buttons to select a setting category. |
2
ENGLISH
When selecting the General Setup | When selecting the Audio Setup |
When selecting the Preference | When selecting the Exit Setup |
• When selecting the Exit Setup to exit from the setup mode, press the ENTER button.
• For the setting details, see page in .
Note :
• During setting operation, only the buttons required for setting of DVD operation buttons will function.
33