INSTALLATION INSTRUCTIONS
PREPARING CABINET FOR FITTING OVEN
Make sure the space between the cabinets is the correct size for the appliance to be fitted (Ref. Fig. 5 & 6).
The plinth board spanning the space into which the appliance is to be installed should be removed.
If the size between adjacent cabinets is
The adjacent cabinets must be stable and firmly secured to the wall or floor. If necessary, make arrangements to ensure the work surface below which the oven will rest is level.
Drill two pilot screw holes into the sides of the adjacent cabinets, in the positions indicated by Fig. 5.
Fit the appliance mounting brackets using the two holes indicated in Fig. 7 to the adjacent cabinets ( Ref. Fig.5 & 6 )
Fig. 5
Fig. 6
Fig. 7
50