Sherwood DS-801 manual AMSAutomatic Music

ENGLISH

To stop playback.

6

1 2 3

4 5 6

7 8 9

or

RM-404	SYSTEM REMOTE
	CONTROL UNIT
	(only for RX-801R)

To rapidly advance or rewind the tape,

7 press the corresponding button in the stop mode.

• In case of forward playback(“”).

To rewind To advance

TUNING

or

RM-404	SYSTEM REMOTE
	CONTROL UNIT
	(only for RX-801R)

•At the desired point, press the STOP or corresponding PLAY button.

In the current position, to reset the TAPE COUNTER to “0000”.

8

	1	2	3
C.RESET	4	5	6
	7	8	9

RM-404	SYSTEM REMOTE
	CONTROL UNIT
	(only for RX-801R)

•“0000” appears in the tape counter.

•When winding or recording the tape, this function is convenient.

AMS(Automatic Music

The automatic music search function automatically skips other musics, finds and starts playback from the desired music. Up to 99th music before or after the current music can be searched quickly on the current side.

•During playback, press the desired button. Example) In case of playback in direction of “”.

For the beginning	For the beginning
of the current music	of the next music

TUNING

or

RM-404	SYSTEM REMOTE
	CONTROL UNIT
	(only for RX-801R)

Ex. 1) To playback the program number 4 while playing back the program number 2.

Press “ ” button twice.

Ex 2.) To playback the program number 3 again while playing back the program number 3.

Press “ ” button only once.

Automatic music search function might not operate as expected if:

•The length of the blank space between two musics is less than 4 seconds.

•The noise level of the blank space is very high.

•The overall recorded volume level of a music is very low.

1 0