CLEANING THE GRILL DEFLECTOR, GRILL PAN, GRILL PAN GRID, OVEN SHELVES AND WIREWORK SIDE RUNNERS
All removable parts are dishwashable. Alternatively, soak them in hot soapy water if they are heavily soiled they will then clean more easily.
The grill deflector, grill pan, meat tin and trivet can be cleaned using a soap impregnated steel wool pad. The grill pan grid, oven shelves and wirework side runners should be cleaned using hot soapy water. Soaking first will make cleaning easier.
NOTE: The grill pan handle should not be cleaned in the dishwasher.
CLEANING INSIDE THE OVEN/GRILL COMPARTMENTS
The main and second oven compartments are coated with a Stayclean finish.
The Stayclean surfaces inside the ovens should not be cleaned manually. See Page 31 'Care of Stayclean Surfaces'.
The vitreous enamel oven base can be cleaned using normal oven cleaners or aerosol oven cleaners
with care. Ensure that the manufacturers instructions are followed and that all parts are well rinsed afterwards.
Aerosol cleaners must not be used on Stayclean surfaces and must not come into contact with the elements or the door seal as this may cause damage.
CLEANING BETWEEN THE OUTER AND INNER DOOR GLASS
The outer door glass is removable for cleaning.
TO REMOVE THE OUTER GLASS
1.Open the oven door slightly to gain access to the two cross head screws on the top of the oven door.
2.Loosen the two screws using a Pozidrive screwdriver.
3.Hold the door glass securely in place with one hand before removing the screws completely with the other hand.
4.Using both hands, gently tilt the top of the door glass towards you. Lift slightly to disengage the locators from the two bottom brackets.
5.Clean the outer and inner glass using hot soapy water or Hob Brite cleaner may be used. DO NOT try to clean the aluminium foil which is inside the door. The foil is there to help keep the door cool, if it is damaged it will not work. Ensure that all parts are well rinsed and thoroughly dry before attempting to replace the outer door.
TO REPLACE THE OUTER GLASS
1.Holding the oven glass with both hands, gently place the locators into the holes of the brackets at the bottom of the oven door.
2.Push the top of the oven glass towards the oven door, ensuring the screw location holes line up.
3.Hold the glass in place with one hand and insert the cross head screws into the location holes with the other hand. Give the screws one turn to ensure the glass is secure.
4.Tighten the screws positively with a Pozidrive screwdriver before closing the oven door.
Do not attempt to use the oven without the glass being in place.
TO CLEAN INSIDE THE INNER GLASS DOOR
The inner glass door is not removable. Clean using hot soapy water or Hob Brite Cleaner and a soft cloth. Take care NOT to use abrasives as they damage the glass or seal.
30