Frigidaire FRS6L7EFS0, FSC23R5DSB7 Howthe Water Dispenser Works, ICE and Water Dispenser Features

Page 13

AUTOMATIC ICE AND WATER DISPENSER

HOWTHE WATER DISPENSER WORKS

The water tank, located behind the drawers in the refrigerator compartment, automatically fills as water is dispensed. For proper dispenser operation, the recommended supply water pressure should fall between 30 psi and 100 psi.

After the refrigerator is connected to the water supply, fill the water tank by drawing one glass of water. It may take about 1½ minutes after activating the dispenser paddle before water begins to fill this first glass. Continue flushing the system for 3 minutes to rid the tank and plumbing connections of any impurities. The water dispenser has a built in shutoff device that will stop the water flow after 3 minutes of continuous use. Simply release the dispenser paddle to reset the shutoff mechanism.

CAUTION

Water pressure must not exceed 100 lbs. Excessive pressure may cause water filter to malfunction.

Chemicals from a malfunctioning softener can damage the ice maker. If the ice maker is connected to soft water, ensure that the softener is maintained and working properly.

“O” position to turn it Off and press it to the “I” position to turn it On. With no usage it will take approximately 2 days to fill the ice container. The ice maker also has a built-in wire signal arm,which automatically stops ice production when the ice bin is full. This signal arm should not be used to manually stop the ice maker.

The ice maker produces 4 to 6 pounds of ice every 24 hours depending on usage conditions. Ice is produced at a rate of 8 cubes every 75 to 90 minutes.

Because of new plumbing connections, the first production of ice cubes may be discolored or have an odd flavor. These should be discarded until the cubes made are free of discoloration and taste.

ICE AND WATER DISPENSER FEATURES

The ice and water dispenser conveniently dispenses chilled water, and ice cubes or crushed ice, depending on the model.

To operate the ice dispenser, select the ice option desired using the touchpad. Press a glass against the dispensing paddle as far up as possible to catch all ice. To stop dispensing ice, pull glass away from dispensing paddle. Do not remove the glass until the ice has completely dispensed. (Complete instructions for the dispenser operation are attached to the inside of the freezer door.)

HOWTHE ICE DISPENSER WORKS -SIDE MOUNTED

The ice maker and container are located in the top of the freezer compartment. After the refrigerator is installed properly and has cooled for several

hours, the ice maker can

begin making ice within 24

ON

 

hours. Air in new plumbing

 

lines may cause the ice

OFF

maker to cycle two or three

 

times before making a full

Wire

tray of ice. To begin ice

Signal Arm

 

production, lower the wire

 

signal arm to the "down" or

 

ON position. With no usage it

 

will take approximately 2 days to fill the ice container.

The ice maker turns off automatically when the ice container becomes full. To stop the ice maker, lift the wire signal arm until it clicks, and locks in the "up" or OFF position.

HOWTHE ICE DISPENSER WORKS -REAR MOUNTED

The ice maker and container are located in the top of the

freezer compartment. After the

OFF

refrigerator is installed

 

properly and has cooled for

 

several hours, the ice maker

 

can begin making ice within

ON

24 hours. Air in new plumbing

 

lines may cause the ice maker

 

to cycle two or three times

 

before making a full tray of ice.

 

Ice production is controlled by

 

the ice maker’s On/Off power

 

switch. Press the switch to the

 

13

ICE DISPENSER TIPS

•Ice cubes stored too long may develop an odd flavor. Empty the ice container and ensure that the wire signal arm is in its “down” or ON position (side mounted) or the ice maker’s On/Off power switch is turned On-set to the “I” position (rear mounted). The ice maker will then produce more ice.

•Occasionally shake the ice container to keep ice separated.

•Keep the wire signal arm in its “up” or OFF position (side mounted) or the ice maker’s On/Off power switch turned Off-set to the “O” position (rear mounted) until the refrigerator is connected to the water supply or whenever the water supply is turned off.

IMPORTANT

Your ice maker is shipped with the wire signal arm in the ON position (side mounted) or turned ON (rear mounted) at the factory. To ensure proper function of your ice maker, hook up water supply immediately or turn ice maker OFF by lifting the wire signal arm until it clicks and locks in the UP position (side mounted) or turn the On/Off switch to the Off (“O”) position. If the icemaker is not turned off and the water supply is not connected, the water valve will make a loud chattering noise.

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Use & Care Manual Please Read and Savethese Instructions Welcome & CongratulationsRegistration Card Included Withyour Foryour Safety Important Safety InstructionsChild Safety Proper Disposal Ofyour Refrigerator or FreezerInstallation Before Installing The Water Supply Line,You Will Need Installation Connecting ICE Maker to Water SupplyTo Connect Water Supply Line To Ice Maker Inlet Valve Door Removal Instructions Door Removal InstructionsTo Remove Refrigerator Door To Remove Freezer DoorTemperature Controls Features AT a GlanceSetting Coolingtemperatures Allowing Coolingtime Before USEWhat to do if the Temperature Displays Flash Makingtemperature AdjustmentsChoosing Fahrenheit or Centigrade Respondingto Alarms Audibletones Indicator Lights SYSTEM-MONITORING AlarmsAIR Filter Indicator & Status Lights Turningthe Cooling System on and OFFLooking Inside Tall Bottle Retainer Some Models Looking Inside Special Storage AreasCrispers Some Humidity Control Some ModelsAutomatic ICE & Water Dispenser Operating Instructions Automatic ICE and Water DispenserHowthe Water Dispenser Works ICE and Water Dispenser FeaturesHowthe ICE Dispenser Works -SIDE Mounted Howthe ICE Dispenser Works -REAR MountedRemove and empty the ice storage bin if Cleaningthe ICE DispenserSystem Startup Puresource TM * ICE and Water Filter Some ModelsPURESOURCE2TM * ICE and Water Front Filter Some Models Resetting The Filter Status Light some modelsPuresource MB ICE and Water Front Filter Some Models Food Storage Ideas Food Storage & Energy Saving IdeasEnergy Saving Ideas Understandingthe Soundsyou MAY Hear Normal Operating Sounds & SightsCondenser Motorized DamperCare & Cleaning Replacing Light Bulbs Consumer Warranty InformationOPENING/CLOSING of DOORS/DRAWERS Before YOU CallWarm DOORS/DRAWERSIce maker will not stop Enough iceMaking ice Ice maker is not separatingRefrigerator

FRS6B5EEW7, FRS6B6EEB0, FRS6B5EEW5, FSC23R5DSB4, FSC23R5DSB9 specifications

Frigidaire is renowned for producing high-quality appliances that enhance the convenience and efficiency of modern kitchen environments. The models FSC23R5DSB7, FSC23R5DB7, FRS6L7EES9, FRS6B7EESB8, and FRS6L9EFSS0 are prime examples of their commitment to innovation and functionality in refrigerator design.

The Frigidaire FSC23R5DSB7 and FSC23R5DB7 are side-by-side refrigerators that feature a sleek stainless steel finish, which not only adds elegance to your kitchen but is also easy to clean. With a total capacity exceeding 21 cubic feet, these models offer ample storage space with adjustable shelves and a dedicated crisper drawer for fruits and vegetables, ensuring items remain fresh longer. The integrated ice and water dispenser provides chilled water and ice on demand, enhancing convenience for families or anyone who enjoys entertaining.

The FRS6L7EES9 and FRS6B7EESB8 are also side-by-side refrigerators, boasting similar designs and features. Both models include the SpaceWise organization system, allowing users to customize the interior for better storage efficiency. The adjustable shelving and door bins are designed to accommodate larger items, ensuring flexibility in food storage. In addition, these models are equipped with advanced temperature management systems that maintain optimal cooling conditions, contributing to food preservation and energy efficiency.

For those looking for enhanced performance, the FRS6L9EFSS0 model is a standout with its TwinTech cooling system. This technology provides two cooling systems: one for the refrigerator and one for the freezer. This separation helps maintain ideal humidity levels and temperature consistency in both compartments, ensuring that food stays fresh while minimizing freezer burn.

All these models are designed with Energy Star compliance, reflecting their efficiency and commitment to reducing energy usage without compromising performance. They also come with a variety of smart features that allow for monitoring and adjusting settings easily, which can enhance the user experience further.

In summary, the Frigidaire FSC23R5DSB7, FSC23R5DB7, FRS6L7EES9, FRS6B7EESB8, and FRS6L9EFSS0 models embody Frigidaire's dedication to quality, style, and innovative technology. Their spacious interiors, advanced cooling systems, and energy-efficient designs make them excellent choices for any modern kitchen.
Top Page Image Contents