INSTALLATION
4Lift the door while adjusting the washer. To raise the door, rotate washer clockwise (when viewed from the bottom). To lower door, rotate washer
To adjust the flipper mullion:
1Loosen the screw located on the flipper mullion hinge.
Raising/Lowering Door
5
Screw (where applicable)
NOTE
If after adjusting doors higher the door makes a popping/clicking sound, remove screw and replace with the longer one supplied in the handle package (select models).
Adjusting Flipper Mullion Screw
2Adjust flipper mullion height. For proper connection with the flipper mullion guide, there should be a separation about the thickness of a coin (0.060 inches, or 1.5 mm) between the guide and flipper mullion.
Adjusting Flipper Mullion Height |
3
8