Controls, Options may vary, Alarms | Frigidaire FFHN2740PS instruction

CONTROLS

A red indicator light will be illuminated above most active features.

Touch the icon to activate the options below.

quick ice	Increases the production of ice
water filter	Press and hold for three seconds to reset after filter
	change.
C/F	Touch to toggle display from Fahrenheit to Celsius.
default settings	Resets all refrigerator settings such as temp, temp
	display and tones to their factory default settings.
Power on-off	Press and hold for three seconds to turn off the cooling
	system to clean the refrigerator. It also turns off the ice
	maker. The temperature displays will read OFF.
Energy Saver	Keep this switch set on energy saver (light on) for low-
	est energy usage. If moisture appears on the cabinet
	between the doors, pressing this button will turn the light
	off and enable an electric heater used to reduce moisture
	on the cabinet between the doors.

IMPORTANT

Pressing the system on-off icon does not turn off power to your refrigerator. You must unplug the power cord from the wall outlet.

Press the “∧” or “∨” indicator to adjust the temperature to the desired setting.

The temperature display will begin to blink with the first touch. The display will time out after 10 seconds and return to the basic display.

Alarms
Door Ajar	If the door has been left open for an extended period
	of time, an alarm will sound and the door ajar indicator
	will display on the bottom display of the control panel.
	The alarm is turned off by closing the door. The mute
	sounds key will blink to prompt the reset of any active
	alarms. Press this key to reset any system alarms.
High Temp	In the event of a high temperature condition, the
	temperature display will blink and display “HI”. After
	20 minutes, the alarm will sound and the high temp
	indicator will be red on the bottom of the control panel.
	The mute sounds icon will illuminate until pressed,
	acknowledging the alarm, at which time the highest
	temperature reached will be displayed and the refrigera-
	tor will resume normal operation. In case the high temp
	alarm is not acknowledged at the first alarm sound time
	out, when the door is first opened, the alarm sound will
	be repeated.
Power Fail	In the event of a power failure, the power fail alert
	will be displayed and the temperature display will blink
	until the mute sounds icon is pressed, acknowledging
	the alarm. Other modes may be turned off until the
	alarm is acknowledged. The power fail alert is turned
	off and the refrigerator will resume normal operation.
	The high temp alarm may also be illuminated until a
	safe operating range temperature has been reached.