HOW the ICE Maker Works

Automatic Ice & Water Dispenser (Continued)

Automatic Ice & Water Dispenser Operating Instructions

1 2 3 4

Features may vary according to model.

Crushed	Press the Crushed Touch Pad	1	to get crushed ice. A red indicator will appear above the Touch Pad.
	Press glass against ICE dispensing paddle 5 as far up as possible to catch all ice.

Cubed	Press the Cubed Touch Pad	2 to get cubed ice. A red indicator will appear above the Touch Pad.
	Press glass against ICE dispensing paddle 5 as far up as possible to catch all ice.

Light On	Press the Light On Touch Pad	3	to turn on dispenser light. A red indicator will appear above the
	Touch Pad.

Light Off	Press the Light Off Touch Pad	4	to turn off dispenser light. A red indicator will appear above the
	Touch Pad.

Water	To operate the water dispenser, press a glass against the WATER dispensing paddle 6 . To stop
	dispensing water, pull the glass away from the dispensing paddle 6 . Dispensed water is not cold.
	For colder water, add crushed ice or cubes before dispensing water. A drip tray located at the base
	of the dispenser catches small spills and allows them to evaporate. This drip tray is removable and
	dishwasher safe. Do not pour water and excess ice in this area because there is no drain.

HOW TO PRIME THE WATER SUPPLY SYSTEM

Your refrigerator’s water supply system includes several tubing lines, a water filter, a water valve and a water tank. To ensure that your water dispenser works properly, this system must be completely filled with water when your refrigerator is first connected to the household water supply line and whenever you replace the water filter.

CAUTION

For proper dispenser operation, recommended water supply pressure should fall between 30 psi and 100 psi. Excessive pressure may cause water filter to malfunction.

TO PRIME THE WATER SUPPLY SYSTEM:

•Begin filling the tank by pressing and holding a drinking glass against the water dispenser paddle.

•Keep the glass in this position until water comes out of the dispenser. There will be noticeable spurts and sputters as the system pushes air out through the system and dispenser nozzle. This is normal. This may take about 1½ minutes.

•Continue dispensing water for about 3 minutes to flush the system of any air and impurities. Empty glass as needed.

NOTE

The water dispenser has a built-in device that shuts off the water flow after 3 minutes of continuous use. To reset this shutoff device, simply release the dispenser paddle.

CAUTION

Chemicals from a malfunctioning softener can damage the ice maker. If the ice maker is connected to soft water, ensure that the softener is maintained and working properly.

IMPORTANT

Your ice maker is shipped from the factory with the wire signal arm in the ON position (side mounted) or with the switch turned ON (rear mounted). To ensure proper function of your ice maker, hook up water supply immediately or turn ice maker OFF by lifting the wire signal arm until it clicks and locks in the UP position (side mounted) or turn the On/ Off switch to the Off (0) position. If the ice maker is not turned off and the water supply is not connected, the water valve will make a loud chattering noise.

241856001 specifications

The Frigidaire 241856001 is a highly regarded refrigerator replacement part known for its reliability and efficiency. Specifically designed for various Frigidaire models, this component plays a vital role in maintaining optimal performance within the refrigerator system.

One of the main features of the 241856001 is its compatibility with a wide range of Frigidaire refrigerator models. This flexibility makes it a popular choice for homeowners and technicians alike, as it can easily replace older or worn-out parts and ensure continued functionality. The part is engineered to meet or exceed original specifications, which guarantees that users benefit from the same quality and performance as the original component.

The 241856001 is built with durable materials that are designed to withstand the rigors of daily use. This durability not only enhances the longevity of the product but also minimizes the need for frequent replacements, making it a cost-effective solution for anyone looking to keep their refrigerator running smoothly.

One notable technology incorporated in this part is its energy-efficient design. In an age where energy consumption is a pressing concern, the Frigidaire 241856001 contributes to lower energy bills by ensuring that the refrigerator operates at its most efficient capacity. This emphasis on energy efficiency aligns with modern consumers’ desires for sustainable and environmentally friendly appliances.

The installation of the 241856001 is straightforward, making it accessible for those who prefer DIY maintenance. Clear instructions are typically included, ensuring that users can confidently replace the component without needing professional assistance. This ease of installation is a significant advantage, as it saves both time and money.

Additionally, the Frigidaire 241856001 boasts a compact design that allows it to fit seamlessly within the confines of the fridge’s architecture. This characteristic ensures that the refrigerator maintains its aesthetic appeal while benefiting from the reliable functionality of this part.

Overall, the Frigidaire 241856001 is a crucial component that enhances the performance of various Frigidaire refrigerator models. With its compatibility, durability, energy efficiency, and easy installation process, it stands out as an excellent choice for those looking to replace or upgrade their refrigerator parts. Whether you are a homeowner or a technician, you can trust the Frigidaire 241856001 to deliver the quality and performance needed for a well-functioning refrigerator.