Care & Cleaning Chart

Care & Cleaning

Keep your refrigerator and freezer clean to prevent odor build-up. Wipe up any spills immediately and clean both sections at least twice a year. Never use metallic scouring pads, brushes, abrasive cleaners or strong alkaline solutions on any surface. Do not wash any removable parts in a dishwasher. Always unplug the electrical power cord from the wall outlet before cleaning.

•When moving the refrigerator, pull straight out. Do not shift the refrigerator from side to side as this may damage the floor. Be careful not to move the refrigerator beyond the plumbing connections.

•Damp objects stick to cold metal surfaces. Do not touch refrigerated surfaces with wet or damp hands.

•To avoid damage and help the refrigerator run as efficiently as possible, clean the condenser periodically.

NOTES:

•Turning the freezer temperature control to OFF turns off the compressor, but does not disconnect electrical power to the light bulb or other electrical components.

•Do not use razor blades or other sharp instruments which can scratch the appliance surface when removing adhesive labels. Any glue left from tape or labels can be removed with a mixture of warm water and mild detergent, or, touch the glue residue with the sticky side of tape you have already removed. Do not remove the serial plate.

Part

Interior/Door Liner

Door Gaskets

Drawers/Bins

Glass

Shelves

Toe Grille

Exterior and Handles

Exterior and Handles (Stainless Steel Models Only)

Condenser

Coils

Cleaning Agents

•Soap and water

•Baking soda and water

•Soap and water

•Glass cleaner

•Mild liquid sprays

•Soap and water

•Mild liquid sprays

•Vacuum attachment

•Soap and water

•Ammonia

•Stainless Steel Cleaners

•Vacuum attachment

Tips and Precautions

Use 2 tablespoons of baking soda in 1 quart of warm water. Be sure to wring excess water out of sponge or cloth before cleaning around controls, light bulb or any electrical part.

Wipe gaskets with a clean soft cloth.

Do not wash any removable items (bins, drawers, etc.) in dishwasher.

Allow glass to warm to room temperature before immersing in warm water.

Vacuum dust from front of toe grille. Remove toe grille (See illustration on page 4). Vacuum backside and wipe with sudsy cloth or sponge. Rinse and dry.

Do not use commercial household cleaners, ammonia, or alcohol to clean handles.

Clean stainless steel front and handles with soapy water. Use ammonia on stubborn spots. Use a non-abrasive stainless steel cleaner. These cleaners can be purchased at most home improvement or major department stores.

Use the dusting tool attachment on your vacuum to remove dust build-up on the condenser coils (see item “J” in illustration on page 17 for location).