Care & Cleaning (continued)
Wear gloves when replacing light bulbs to avoid getting cut.
REPLACING LIGHT BULBS
1.Unplug refrigerator.
2.Wear gloves as protection against possible broken glass.
3.Remove light cover, if necessary.
4.Unscrew and replace old bulb with an appliance bulb of the same wattage.
5.Replace light cover, if necessary.
6.Remember to plug the refrigerator back in.
Crisper Light Replacement (Some Models)
Refrigerator Light Replacement
Freezer Light Replacement
Short Vacations
Long Vacations
Moving
Vacation and Moving Tips
•Leave refrigerator operating during vacations of 3 weeks or less.
•Use all perishable items from refrigerator compartment.
•Turn automatic ice maker off, even if you will only be gone for a few days.
•Remove all food and ice if you will be gone one month or more.
•Turn controls to OFF and disconnect power.
•Turn off automatic ice maker and turn water supply valve to closed position.
•Clean interior thoroughly.
•Leave both doors open to prevent odors and mold
•Remove all food and ice.
•If using handcart, load from side.
•Adjust rollers all the way up to protect them during sliding or moving.
•Pad cabinet to avoid scratching surface.
IMPORTANT: If the refrigerator is going to be stored or moved in freezing temperatures, the water in the ice and water system must be drained completely. Failure to do so could result in water leaks when the refrigerator is put back into service. Contact a service representative to perform this operation.
19