Technical Specifications B, Power Requirements | Paradyne 316x

Technical Specifications B

The technical specifications for the Models 3160/3164 DSU/CSUs are listed in Table B-1. The technical specifications for the Model 3161 DSU/CSU are listed in Table B-2.

Table B-1

(1 of 2)

ACCULINK Models 3160/3164 DSU/CSUs Technical Specifications

	Specifications	Criteria

	POWER REQUIREMENTS
	Typical	104±132 Vac; 60 Hz ±3; 0.15A at 115 Vac for 3160, 0.175A at 115 Vac for 3164
	Options:
	Options:
	+24 Vdc	+20 Vdc to +32 Vdc, 0.50A
	±48 Vdc	±38 Vdc to ±60 Vdc, 0.25A
	±48 Vdc Redundant	±38 Vdc to ±60 Vdc, 0.25A

	POWER CONSUMPTION AND	16.0 watts, 55.0 Btu per hour at 115 volts(ac power); 12.0 watts, 41 Btu per hour
	DISSIPATION	at +24 and ±48 Vdc (dc power)

	DTE (DSX-1) INTERFACE
	Physical Interface	DB15 socket
	Framing Format	D4, ESF
	Coding Format	AMI, B8ZS
	DTE Line Equalization	5 selectable ranges from 0 to 655 feet (0 to 196.5 meters)
	Send AIS	Selectable

	NETWORK T1 INTERFACE
	Physical Interface (USA)	RJ48C
	Physical Interface (Canada)	CA81A using adapter cable
	Framing Format	D4, ESF
	Coding Format	AMI, B8ZS
	Line Build-Out (LBO)	0.0 dB, ±7.5 dB, ±15 dB, ±22.5 dB
	ANSI PRM	Selectable
	Bit Stuffing	FCC Part 68, AT&T TR 62411
	Yellow Alarm Generation	Selectable

	LOOPBACKS
	Standard	AT&T TR 54016, AT&T TR 62411, ANSI T1.403.1989
	Additional	RLB (Repeater Loopback), DLB (DTE Loopback), V.54 Loop 2 and Loop 3,
		ANSI T1.403 Annex B Fractional T1 Loopback

PORT INTERFACE

Standards

Rates

EIA 530A, V.35, RS±449, V.11

Nx64 ± 64-1.536 Mb

Nx56 ± 56-1.344 Mb

3160-A2-GB22-10

December 1996

B-1

Image 138

Paradyne 316x manual Technical Specifications B, Power Requirements

Contents

Channel Service Unit Includes Terminal User Interface Operators Guide 3160-A2-GB22-10 Warranty, Sales, and Service InformationTrademarks Copyright E 1996 Paradyne Corporation. All rights reserved Important Safety Instructions CC DGD D C D CC Government Requirements and Equipment Return United States316x DSU/CSU Facility Interface Codes Description Canada Government Requirements Table of Contents Glossary Index List of Figures LCD Slide Latch Adapter Cable Feature Number 3100-F1-560 Models 3160/3614 DSU/CSUs Rear Panel Connectors List of Tables Acculink 316x DSU/CSU Related Documents PrefaceObjectives and Reader Assumptions Reference Documents Introduction Overview Integral Modem FeaturesAlarm Interface User Interface Front Panel Pass-Through Front Panel Access Control FeatureFront Panel Emulation Async Terminal Interface Support 3160/3164 DSU/CSU Front Panel Acculink 316x DSU/CSU Physical DescriptionStandalone Model 3160/3164 DSU/CSUs 3160/3164 DSU/CSU Rear Panel DSU/CSU Front Panel LCD DSU/CSU Rear Panel Models 3160/3164 DSU/CSUs Rear Panel Connectors Connector NameFunction Carrier-Mounted Model 3161 DSU/CSU Model 3161 Front Panel FunctionsModel 3161 DSU/CSU Rear Panel Auxiliary Backplane Installation Planning Network Fractional T1 Serial Connection to Snmp Box Contents Quick Start Procedure Optional Power Selection Installing the +24 Vdc Power Supply Installing the Single ±48 Vdc Power Supply ±48 Vdc Single Source Power Supply Pinouts Installing the Redundant ±48 Vdc Power Supply ±48 Vdc Redundant Source Power Supply Pinouts Power-Up Self-Test DSU ESF Status DevHS STest Perf Selecting a ModelDSU/CSU Identity Status TStat LED ID Identity Mod=xxxx-xx-xxx Control Reset CID PasswordIdentity Ser=xxxxxxx Identity Cust ID=xxxxxxxx Establishing Access Security on a Port Setting/Changing a Password Control Reset CID Passwd Passwd Up Down Save 3160/3164 DSU/CSU Cabling 13 /3164 DSU/CSU Cabling Configurations Factory Default Configuration Options Installing Front Panel Emulation Software Enabling/Disabling the Front Panel 3160/3164 DSU/CSU User Interface Access Security Changing User Interface Access Security Security Lvl1 Lvl2 Operation LCD Acculink 316x DSU/CSU Operating the Front Panel Model 3161 DSU/CSU Faceplate Context-Sensitive Menu Device Health and Status MessagesOther Displays Keypad LEDs LEDs System LEDs Name Color Meaning Network Interface LEDs SIG DSX-1 Drop/Insert Port LEDs PDV Data Port LEDs DTR Displaying LED Conditions on the Front Panel DTR TXD DTE Selecting the DSX-1 or a Port for LED DisplayLED Dsply DTE Prt1 Prt2 Front Panel Emulation on a PC LED Display Selection Screen Test Jacks Front Panel Emulation Screen Icons Name Meaning 12 DSU/CSU Test Jacks Configuration Options Configuring the DSU/CSUConfiguration Option Areas Test Jack Functions Configuration Procedures 14. Configuration Branch for the Front Panel Displaying/Editing Configuration Options 15. Configuration Branch for the Async Terminal NET Framing ESF Next D4 ESF 16. Load From Screen Saving Edit Changes Save Edit to Activ Cust Selecting/Copying to a Specific Port Selecting a Specific PortPort Select Copy Prt1 Prt2 Prt3 Value Options Prt1 Value OptionsPrt2 Value Options Prt4 Value Options To Copy to One or All Ports Copy From Prt1 Prt2 Prt3Copy To All Prt1 Prt2 Configuring the 3160/3164 DSU/CSU for Snmp Management Selecting the Port Modem Use Next Snmp Ascii Setting the IP Address Com Use Next Snmp Ascii Snmp Edit User AlarmSnmp Config Gen Trap System Name Next Edit Clear Selecting the Link Layer Protocol 000.000.000.000 Up Down Save010.155.111.222 Up Down Save Specifying the Community Names and Access Types Modem Link Next PPP Slip CommunityName1 Next Edit Clear Public Up Down Save Newname Up Down Save Access Next Read R/WSnmp Traps Enterprise-Specific Trap Definitions Trap Value Event Selecting the Number of Trap Managers Num Trap Mgrs1 Next Configuring an IP Address for Snmp Trap Manager 23. Trap Options Screen Configuring DS0 Channels Trap n IP Adr Next Edit Clear 24. Example Channel Allocation Network T1 Interface Network Channel Allocation 25. Example Interface Tables DTE Chan Assign Voice Config N1 ± RBS or Data 26. DS0 Channels Containing RBS Information Worksheet Port Chan Options Value Conf NET, DTE Port Chan Options Value Conf Displaying DS0 Channel Assignments Display Channel Symbols MeaningChannel Config Dsply Clear DTE Edit Port NET Chan Display Chan NET DTEPrt1 Allocating Data Ports Block Channel Assignment Method Example NET Start AtClear Next Clear N1 Acami Channel Assignment Method ExamplePort Rate384 Next 64 Assign ByACAMI Next Block Acami Assign ByChan Next Block Acami Individual Channel Assignment Method ExampleAssign ByChan Block Acami Chan Next Prt1 Prt2 DTE Channels Assign Voice 30. DTE Assignment Screen RBS Clearing DS0 Channel Allocation Clear Channel 32. Common Clocking Configurations Timing GenYellowEnab Next Enab Disab Configuring for Network Timing ExampleEdit NET Chan Gen Clock SrcNET Next NET DTE Configuring for External Timing Example Clock SrcNET Prt1 Int ExtClock Rate1544 Next 2048 Selecting the Shared Communication Port 101Self±TestEnab Next Enab Disab Checking the Status Device Health and StatusMasterComDisab Next Enab Disab Health and Status Messages MessageDescription Device H/S OOF at DTE Displaying Device Health and StatusSelf-Test Health Auto Dev H/S OOF at DTE Message Description Displaying Self-Test ResultsSelf-Test Health Messages STest Health Passed Event=xx,xxx CurTimerPerformance Report VldIntvl=xx 35. Carrier Telco and User Register Organization StEvnt Displaying User Performance Registers Clearing User Performance Registers 36. Telco Performance Report Screen Controlling the DSU/CSU LED Releasing the Active Physical Interface Acquiring/Releasing the Active Physical InterfaceAcquiring the Active Physical Interface DSU Fmt Using the Integral Modem Initiating a Call for Front Panel Pass-Through OperationFt. Panel Released Call Setup Pass Dial ChDir Pass n Up Down DialDial n Up Down Dial Entering a Password to Gain Access Passwd Up Down Done Disconnecting Using Front Panel Keys Disconnecting the Modem ConnectionDisconnecting Using the Disconnect Command Call Setup Disc ChDir Entering Numbers in the Phone Directories Xxxxxxxxxxxxxxxxx Next Prev Edit Xxxxxxxxxxxxxxxxx Up Down Save Valid Phone Number Characters Meaning Restrictions Starting Front Panel Emulation Deactivating the Alarm RelayAlarm Cut-Off Command Complete Control ACO Rel LED Using the Async Terminal Feature Setting Interface Options Initiating an Async Terminal Session Entering a PasswordActivating Interface Option Changes Async Terminal Menus and Screens Menu Selection Screens Edit and Display Screens Hard-Key Representations for Edit Screens Usage Function Representations for Edit Screens Function Key Usage Terminating a Session Maintenance Troubleshooting Snmp Trap per Interface AlarmsSnmp Traps Interface Snmp Trap Meaning Test Commands Test Branch Test Rlpbk Lpbk Ptrns Remote Loopback TestsSending a Line Loopback Up or Down Rem Loopback Sending a V.54/ANSI FT1 Activation/Deactivation Local Loopback TestsRem Loop Type Prt1 Prt2 Prt3 Starting a Line Loopback Valid Loopback CombinationsLoopback Abort LLB PLB Starting a Payload Loopback Starting a DTE Loopback Starting a Repeater Loopback LoopbackLLB PLB DLB DLB RLB Dclb Starting a Data Channel LoopbackPLB DLB RLB Loopback Dclb Prt1 Prt2 Prt3 Starting a Data Terminal Loopback RLB Dclb DtlbLoopback Dtlb Prt1 Prt2 Prt3 Loopback Abort All DTE-initiated LoopbacksAborting Loopbacks LLB PLB Test Patterns Sending Test Patterns Patterns Mon Qrss Monitoring Test Patterns8 Network Port Monitor Name NET Prt1 Prt2 Starting a Lamp Test Aborting Test PatternsLamp Test Patterns Abort All Send Mon Lamp Test Abort Start Aborting a Lamp TestTest Lpbk Ptrns Lamp 0123456789 = ? Displaying DSU/CSU Test Status Test Status Messages Resetting the DSU/CSU Downloading SoftwareStatus STest Perf TStat Control ClrUsr Reset Device Reset Yes No Front Panel Menu a 3160-A2-GB22-10 Front Panel Menu Technical Specifications B Power Requirements Clocking Sources Power Consumption Dissipation Pounds .82 kg Configuration Options C Functional Grouping DTE Interface Configuration Options Table C-1 DTE Interface Configuration OptionsContext-Sensitive Menu Extrn DLB Disab Next Enab Disab Prev Send Ones Enab Next Enab Disab Prev Table C-2 Port Configuration OptionsPort Configuration Options Port Type E530 Factory Next E530 V.35 RS449 Prev Table C-2 Port Configuration Options All Ones Both Next Disab DTR RTS Both PrevRcv Yellow Halt Next None Halt Prev Tx Clock Int Next Int Ext Prev Invert TxC Disab Next Enab Disab PrevInvert Data Disab Next Enab Disab Prev Network Interface Configuration Options Table C-3 Network Interface Configuration Options NET PLB Enab Next Enab Disab Prev Bit Stuff Next 62411 Part68 Disab Prev Channel Configuration Options Table C-4 DTE Channel Configuration Options Table C-5 Data Port Channel Configuration Options Start At Clear Next N10 N11 N24 Prev D10 D11 D24 N10 N11 N12 N24 Next Prev D10 D11 D12 D24 Gen Yellow Enab Next Enab Disab Prev General Configuration OptionsTable C-6 General Configuration Options Clock Src NET Next NET DTE Prt1 Int Ext Prev User Interface Configuration Options Table C-7 User Interface Configuration Options Com Type Async Next Async Sync Prev MasterComDisab Next Enab Disab PrevCom Use Ascii Next Snmp Ascii Term Prev Com Clk Int Next Int Ext Prev CParity None Next None Even Odd Prev Com Rate Next 1.2 2.4 4.8 9.6 14.4 19.2 PrevChar Length Next 7 8 Prev CStop Bits Next 1 1.5 2 Prev MChar Len Next 7 8 Prev Modem Type Async Next Async Sync PrevModem Rate Next 1.2 2.4 Prev MParity None Next None Even Odd Prev Alrm Msg Disab Next Disab Modem Com Both Prev Alarm Configuration OptionsTable C-8 Alarm Configuration Options Snmp Trap Disab Next Enab Disab Prev Call Retry Disab Next Enab Disab Prev Dial Delay Next 1 2 3 4 5 6 7 8 9 10 PrevDialOut Disab Next Enab Disab Prev Next None 1 2 3 4 5 Prev Err Rate 10E-4 Next 10E-4 10E-5 10E-6 10E-7 10E-8 10E-9 Prev AlrmRelay Disab Next Enab Disab Prev Snmp Configuration Options Table C-9 General Snmp Configuration Options Com Link PPP Next PPP Slip Prev Access 2 Read Next Read R/W PrevCom IP Adr Clear Next Edit Clear Prev Modem IP Adr Clear Next Edit Clear Prev Trap n IP Adr Clear Next Edit Clear Prev Table C-10 Snmp Trap Configuration OptionsNum Trap Mgrs Next 1 2 3 4 5 6 Prev Gen Trap Both Next Disab Warm Auth Both Prev Link Trap Both Next Disab Up Down Both Prev Trap I/F All Next NET DTE T1s Ports All Prev T1 Network Connector Interface Pin Assignments DCables Receiver Ring Receiver Tip Transmitter Ring Transmitter Tip RJ48C DA15P DSX-1 Port DTE Interface Integral Modem Service Port Interface AUX Port Interface Figure D-5. COM Port-to-PC Cable Feature Number 3100-F1-550 COM Port Interface Acculink 316x DSU/CSU EIA-530A DB25 Port Interface Connector Table D-7 EIA-530A Port Interface Connector Signal CircuitDirection Pin Mnemonic Number RS449 Port Interface Connector Table D-8 RS449 Port Interface Connector Signal Circuit Pin Assignments Port Interface Connector Table D-9 Port Interface Connectors SignalDirection Pin Number Pin Assignments Power Cable Power Input ConnectorTable D-10 DC Power Connector Signal Pin Number External Clock Connector Figure D-11. The connector information is in Table D-12 Slide Latch Adapter Snmp MIB Objects E Management Information Base MIB II RFC System Group Supported System Group ± ªsysDescrº Object system System Group ± ªsysServicesº Object systemSystem Group, MIB System Group ± ªsysObjectIDº Object system Interface Group ± ªifTypeº Object ifEntry Interface Group, MIBInterface Group ± ªifDescrº Object ifEntry Interface Group ± ªifMtuº Object ifEntry Interface Group ± ªifAdminStatusº Object ifEntry DTE UDP Group, MIB IP Group ± ªipNetToMediaTableº Object ipIcmp Group, MIB IP Group, MIB DS1/E1 MIB RFC Near End Group ± ªdsx1SendCodeº Object dsx1ConfigEntry Near End Group ± ªdsx1LineStatusº Object dsx1ConfigEntryNear End Group ± ªdsx1SignalModeº Object dsx1ConfigEntry Near End Group ± ªdsx1Fdlº Object dsx1ConfigEntry Far End Group, DS1/E1 MIB RS-232-like MIB RFCNear End Group ± The DS1 Total Table Objects dsx1TotalEntry DS1 Fractional Group, DS1/E1 MIB General Port Table ± ªrs232PortIndexº Object rs232PortEntry Number of Ports ± ªrs232Numberº Object rs232General Port Table, RS-232-like MIB General Port Table ± ªrs232PortTypeº Object rs232PortEntry Input Signal Table ± ªrs232InSigStateº rs232InSigEntry Input Signal Table, RS-232-like MIBInput Signal Table ± ªrs232InSigNameº rs232InSigEntry Input Signal Table ± ªrs232InSigChangesº rs232InSigEntry Output Signal Table ± ªrs232OutSigChangesº rs232OutSigEntry Output Signal Table ± ªrs232OutSigNameº rs232OutSigEntryOutput Signal Table ± ªrs232OutSigStateº rs232OutSigEntry Generic-Interface MIB Extensions RFC Acculink 316x DSU/CSU Troubleshooting Table F Table F-1 Troubleshooting Symptom Possible Cause SolutionsYellow at Net Yellow at DTE AIS at NetAIS at DTE Configuration Worksheets G DTE Net Value Options Configuration Worksheets Network T1 Interface Network Channel Allocation D10 D11 D12 D13 D14 D15 D16 D17 D18 D19 D20 D21 D22 D23 D25 Acami Port Chan Options Value Conf User Options Value Alarm Value OptionsGeneral Options Value Snmp Gen Value Options PEC Code Equipment Feature NumberEquipment List H Cable numbers for DSU/CSU are located Glossary AIS EER Index DTE Index Index-4