Paradyne 316x Configuring the DSU/CSU, Configuration Option Areas, Configuration Options, Net In

ACCULINK 316x DSU/CSU

	Table 3-6
	Test Jack Functions
Test Jack Name	Function
Net In	A break-in and test jack that allows a signal to be inserted toward the network by
(Network In)	external test equipment. The signal is inserted on the DSX-1 side of the
	DSU/CSU.
Net Out	A break-in and test jack that interrupts the signal coming from the network and
(Network Out)	allows it to be terminated by the external test equipment.
Net Mon In	A monitor jack that nonintrusively monitors the incoming signal from the network.
(Monitor Network)
Net Mon Out	A monitor jack that nonintrusively monitors the incoming signal from the DSX-1.
(Monitor DSX-1)
Eqp Mon Net	A break-in and test jack that allows a signal to be inserted toward the DSX-1 by
(Equipment In)	external test equipment.
Eqp Mon Eq	A break-in and test jack that interrupts the signal coming from the DSX-1 and
(Equipment Out)	allows it to be terminated by the external test equipment.

Configuring the DSU/CSU

You have the option of customizing your 316x DSU/CSU for optimum performance in your network. To do so, use the DSU/CSU configuration options. Appendix G contains a set of blank worksheets to use when configuring your 316x DSU/CSU in the network.

Configuration Option Areas

The 316x DSU/CSU offers four sets of configuration options located in the following areas:

•Active (Activ). The configuration option set active for the DSU/CSU is stored here. Before a set of configuration options become active for the DSU/CSU, you must save the set to the Active area. When the DSU/CSU is shipped from the factory, the Active configuration option set is identical to both the Customer and the Factory 1 sets. This area can be written to and controls the current operation of the device.

•Customer (Cust). This is the set of customer-defined configuration options. Customer set is identical to the Factory 1 set when the DSU/CSU is shipped from the factory. This area can be written to.

•Factory 1 (Fact1). This is a set of configuration options preset at the company. This set is determined by what is considered to be the most common configuration used in the DSU/CSU market. Factory 1 options are read-only.

•Factory 2 (Fact2). This is a set of configuration options preset at the company. This set is determined by what is considered to be the second most common configuration used in the DSU/CSU market. Factory 2 options are read-only.

Configuration Options

The configuration options are divided into seven functional groups. Appendix C contains a list of the configuration options and defaults. These groups are:

•DTE (DSX-1) Interface (see Table C-1)

•Port (see Table C-2)

•Network Interface (see Table C-3)

•Channel (see Tables C-4 and C-5)

•General (see Table C-6)

•User Interface (see Table C-7)

•Alarm (see Table C-8)

•General SNMP (see Table C-9)

•SNMP Trap (see Table C-10)

3-16 December 1996 3160-A2-GB22-10