Paradyne 316x manual Near End Group ± ªdsx1TransmitClockSourceº Object dsx1ConfigEntry

SNMP MIB Objects

Near End Group ± ªdsx1TransmitClockSourceº Object (dsx1ConfigEntry 12)

This object specifies the timing source for the transmit clock for this T1 interface. This object differs from the MIB definition in that it is ªread-onlyº (not read/write) for DSU/CSUs. Only the following values are supported by the DSU/CSU.

•loopTiming(1) ± The recovered receive clock is being used as the transmit clock.

•localTiming(2) ± The DSU/CSU's internal clock is being used as the transmit clock.

•ThroughTiming(3) ± The recovered receive clock from another interface (e.g., T1, Port, or External) is being used as the transmit clock.

Near End Group ± ªdsx1Fdlº Object (dsx1ConfigEntry 13)

This object specifies how the Facility Data Link is being used. Only the following values are supported by the DSU/CSU. More than one value may be active at a time.

•dsx1Ansi-T1-403 (2) ± ANSI PRMs are supported on the Network T1 interface as specified by ANSI T1.403.

•dsx1Att-54016(4) ± The FDL supports the requirements specified by AT&T publication TR54016.

•dsx1Fdl-none(8) ± Indicates that the device does not use the FDL. This value applies to the DTE Drop/Insert T1 interface.

Near End Group ± The DS1 Current Table Objects (dsx1CurrentEntry)

The following DS1 current table objects are provided for the Network T1 interface only. Objects in the table that are not listed are not supported and will return an error status if access is attempted.

•dsx1CurrentIndex ± The index that identifies the T1 interface.

•dsx1CurrentESs ± Errored Seconds for the current interval.

•dsx1Current SESs ± Severely Errored Seconds for the current interval.

•dsx1CurrentUASs ± Unavailable Seconds for the current interval.

•dsx1CurrentCSSs ± Controlled Slip Seconds for the current interval.

•dsx1CurrentBESs ± Bursty Errored Seconds for the current interval.

Near End Group ± The DS1 Interval Table Objects (dsx1IntervalEntry)

The following DS1 interval table objects are provided for the Network T1 interface only. Objects in the table that are not listed are not supported and will return an error status if access is attempted.

•dsx1IntervalIndex ± The index that identifies the T1 interface.

•dsx1IntervalNumber ± The interval number (1 to 96).

•dsx1IntervalESs ± Errored Seconds for the interval.

•dsx1Interval SESs ± Severely Errored Seconds for the interval.

•dsx1IntervalUASs ± Unavailable Seconds for the interval.

•dsx1IntervalCSSs ± Controlled Slip Seconds for the interval.

•dsx1Interval BESs ± Bursty Errored Seconds for the interval.

3160-A2-GB22-10 December 1996 E-9