Paradyne 316x manual Network, 1. Example Point-to-Point Configuration, Services

ACCULINK 316x DSU/CSU

In addition, a 3160 DSU/CSU, acting as an SNMP agent, can be connected to and managed from an SNMP management system in one of two ways:

•Serial connection via the COM or MODEM port to an SNMP management system using either Point-to-Point Protocol (PPP) or Serial Line Internet Protocol (SLIP) (Figure 2-5).

•Serial connection via the COM or MODEM port (using PPP or SLIP) through a network device (e.g., router) that supports IP routing to the network management system (Figure 2-6).

	T1	T1
		NETWORK
LAN	ACCULINK	ACCULINK	LAN
ROUTER	3160/3164 DSU/CSU	3160/3164 DSU/CSU	ROUTER
			496-14296-03

Figure 2-1. Example Point-to-Point Configuration

PBX	NETWORK
	SERVICES
	DSU/CSU
LAN

ROUTER 496-14312-03

Figure 2-2. Example Shared Access to Network-Based Services Configuration

2-2 December 1996 3160-A2-GB22-10