Paradyne 316x manual Valid Phone Number Characters, Valid Characters, Restrictions, Meaning

ACCULINK 316x DSU/CSU

6.Press F3 (Edit) to change the displayed directory's phone number (phone numbers can be up to 40 characters). If you select Edit, the Edit screen appears.

1:xxxxxxxxxxxxxxxxx Next Prev Edit

F1 F2 F3

7.Use the and keys to position the cursor under the digit(s) you want to change. Press F1 to scroll up to a higher digit. Press F2 to scroll down

to a lower digit. The ( ) key inserts blanks

(default character) while the ( ) key invokes the End Of Number (EON) character which terminates the dial string and erases any characters to the right when you use the Save function.

See Table 3-12 for the set of valid characters and rules that apply to entering phone numbers.

8.Press F3 (Save) to store your changes in

nonvolatile memory. If you press or before saving the phone number you just changed, the previous phone number remains in effect.

1:xxxxxxxxxxxxxxxxx

Up Down Save

F1 F2 F3

Differences Using the Async Terminal: To edit phone directories, select Edit Directory from the main/control menu. This selection is the same as using the ChDir selection from the front panel.

Example: P9W8135551212

Table 3-12

Valid Phone Number Characters

Valid

Characters

Meaning

Restrictions

0 to 9

DTMF or pulse digits

Ð

* #	DTMF digits	Ð
P	Sets modem for Pulse Dial Mode	Pulse or Tone must be specified, otherwise
		Tone is the default. This must be the first
		character in the string, unless the first character
		is B. Then, it must immediately follow the B.
T	Selects Tone (DTMF) dialing	Tone or Pulse must be specified, otherwise
		Tone is the default. This must be the first
		character in the string, unless the first character
		is B. Then, it must immediately follow the B.
W	Wait for dial tone	Ð
B	Blind dialing (you need not wait for a dial tone before	Must be the first character in the string to be
	entering the dialing sequence)	valid
,	Creates a 2-second pause in the dialing sequence	Ð
<space> ( ) -	Extra characters for readability. The space is the	Ð
	default character.
<-	End Of Number (EON) character, terminates the dial	Ð
	string and erases all characters to the right after F3
	(Save) is pressed

3-68 December 1996 3160-A2-GB22-10