Paradyne 316x manual NETWORK Interface LEDs, Name, Color, Meaning, Alrm

ACCULINK 316x DSU/CSU

			Table 3-2
			NETWORK Interface LEDs
Name	Color		Meaning
SIG	Green	Monitors the signal being received from the network.
		ON:	A recoverable signal is being received from the network.
		OFF:	The signal cannot be recovered from the network (a Loss of Signal
			condition exists).
OOF	Yellow	Monitors Out Of Frame (OOF) conditions on the received network signal.
		ON :	At least one OOF was detected on the signal during the sampling
			period.
		OFF:	No OOFs were detected on the signal during the sampling period.
ALRM	Yellow	Indicates whether an alarm condition exists on the received network signal.
		ON:	An alarm condition (LOS, LOF, EER, Yellow, AIS) exists on the received
			network signal. Use the Device Health and Status command to
			determine the alarm type.
		OFF:	No alarm condition exists on the network interface signal.
EER	Yellow	Indicates when the excessive error rate has been exceeded on the network
		interface.
		NOTE: This LED is only valid when ESF framing is being used.
		ON:	The excessive error rate has been exceeded on the network interface.
		OFF:	The excessive error rate has not been exceeded on the network
			interface.

3-8 December 1996 3160-A2-GB22-10