Display Chan, Net Dte, Prt1 | Paradyne 316x specs

Operation

7.From the Display Chan screen, press F1 (NET) to display the channels allocated to the Network T1 interface.

Display Chan:

NET DTE

F1 F2 F3

NOTE

If the DSX-1 Drop/Insert T1 Network interface is disabled, the Network T1 interface channels are displayed immediately. The Display Chan screen does not appear.

Or, press F2 (DTE) to display the channels allocated to the DSX-1 Drop/Insert T1 interface.

Display Chan:

NET DTE

F1 F2 F3

8.If you pressed F1 (NET) the channels allocated to the Network T1 interface are displayed. Line 1 displays the 24 channels for the Network T1 interface, while Line 2 displays what is allocated to the DS0 channel shown in Line 1. Pressing the or key scrolls the channels onto the screen in groups of three.

N1	N2	N3
D2	D3	Prt1
F1	F2	F3

If you pressed F2 (DTE), the channels allocated to the DSX-1 Drop/Insert T1 interface are displayed. Line 1 displays the 24 channels for the DSX-1 Drop/Insert T1 interface, while Line 2 displays what is allocated to the DS0 channel shown in Line 1.

D1	D2	D3
±	N1	N2
F1	F2	F3

Differences Using the Async Terminal: To display DS0 channel assignments, select Display Channels from the main/configuration/edit/channel menu. Figure 3-29 shows an example of the screen that appears. The screen displays both the Network T1 and the DSX-1 Drop/Insert interface channel assignments.

	main/configuration/edit/channel/display
Customer ID: New Cust	Model: ACCULINK XXXX
		NET
N1: Prt1	N7: D7	N13: D13	N19: D19
N2: Prt1	N8: D8	N14: D14	N20: D20
N3: Prt1	N9: D9	N15: D15	N21: D21
N4: D4	N10: D10	N16: D16	N22: Prt3
N5: D5	N11: D11	N17: ±	N23: Prt3
N6: D6	N12: D12	N18: D18	N24: Prt3
		DTE
D1: N17	D7: N7	D13: N13	D19: N19
D2: Prt2	D8: N8	D14: N14	D20: N20
D3: Prt2	D9: N9	D15: N15	D21: N21
D4: N4	D10: N10	D16: N16	D22: Prt4
D5: N5	D11: N11	D17: ±	D23: Prt4
D6: N6	D12: N12	D18: N18	D24: Prt4
	Main	Previous Cntrl±x to Disconnect

Figure 3-29. Display Channels Screen

3160-A2-GB22-10

December 1996

3-41

Image 83

Paradyne 316x manual Display Chan, Net Dte, Prt1

Contents

Channel Service Unit Includes Terminal User Interface Copyright E 1996 Paradyne Corporation. All rights reserved Warranty, Sales, and Service InformationTrademarks Operators Guide 3160-A2-GB22-10 Important Safety Instructions CC DGD D C D CC 316x DSU/CSU Facility Interface Codes Description Government Requirements and Equipment ReturnUnited States Canada Government Requirements Table of Contents Glossary Index LCD List of Figures Slide Latch Adapter Cable Feature Number 3100-F1-560 List of Tables Models 3160/3614 DSU/CSUs Rear Panel Connectors Acculink 316x DSU/CSU Reference Documents PrefaceObjectives and Reader Assumptions Related Documents Overview Introduction User Interface FeaturesAlarm Interface Integral Modem Async Terminal Interface Support Front Panel Access Control FeatureFront Panel Emulation Front Panel Pass-Through 3160/3164 DSU/CSU Rear Panel Acculink 316x DSU/CSU Physical DescriptionStandalone Model 3160/3164 DSU/CSUs 3160/3164 DSU/CSU Front Panel LCD DSU/CSU Front Panel DSU/CSU Rear Panel Function Models 3160/3164 DSU/CSUs Rear Panel ConnectorsConnector Name Model 3161 DSU/CSU Rear Panel Carrier-Mounted Model 3161 DSU/CSUModel 3161 Front Panel Functions Auxiliary Backplane Planning Installation Network Fractional T1 Serial Connection to Snmp Quick Start Procedure Box Contents Installing the +24 Vdc Power Supply Optional Power Selection ±48 Vdc Single Source Power Supply Pinouts Installing the Single ±48 Vdc Power Supply ±48 Vdc Redundant Source Power Supply Pinouts Installing the Redundant ±48 Vdc Power Supply DSU ESF Power-Up Self-Test Status TStat LED ID Selecting a ModelDSU/CSU Identity Status DevHS STest Perf Identity Cust ID=xxxxxxxx Control Reset CID PasswordIdentity Ser=xxxxxxx Identity Mod=xxxx-xx-xxx Setting/Changing a Password Establishing Access Security on a Port Passwd Up Down Save Control Reset CID Passwd 3160/3164 DSU/CSU Cabling 13 /3164 DSU/CSU Cabling Configurations Installing Front Panel Emulation Software Factory Default Configuration Options Enabling/Disabling the Front Panel 3160/3164 DSU/CSU User Interface Access Security Security Lvl1 Lvl2 Changing User Interface Access Security LCD Operation Acculink 316x DSU/CSU Operating the Front Panel Model 3161 DSU/CSU Faceplate Keypad Device Health and Status MessagesOther Displays Context-Sensitive Menu LEDs LEDs Name Color Meaning System LEDs SIG Network Interface LEDs PDV DSX-1 Drop/Insert Port LEDs DTR Data Port LEDs DTR TXD Displaying LED Conditions on the Front Panel Prt1 Prt2 Selecting the DSX-1 or a Port for LED DisplayLED Dsply DTE DTE LED Display Selection Screen Front Panel Emulation on a PC Front Panel Emulation Screen Icons Name Meaning Test Jacks 12 DSU/CSU Test Jacks Test Jack Functions Configuring the DSU/CSUConfiguration Option Areas Configuration Options 14. Configuration Branch for the Front Panel Configuration Procedures 15. Configuration Branch for the Async Terminal Displaying/Editing Configuration Options 16. Load From Screen NET Framing ESF Next D4 ESF Save Edit to Activ Cust Saving Edit Changes Port Select Copy Prt1 Prt2 Selecting/Copying to a Specific PortSelecting a Specific Port Prt4 Value Options Prt1 Value OptionsPrt2 Value Options Prt3 Value Options Copy To All Prt1 Prt2 To Copy to One or All PortsCopy From Prt1 Prt2 Prt3 Selecting the Port Configuring the 3160/3164 DSU/CSU for Snmp Management Modem Use Next Snmp Ascii Com Use Next Snmp Ascii Setting the IP Address System Name Next Edit Clear Edit User AlarmSnmp Config Gen Trap Snmp 010.155.111.222 Up Down Save Selecting the Link Layer Protocol000.000.000.000 Up Down Save Modem Link Next PPP Slip Specifying the Community Names and Access Types Public Up Down Save CommunityName1 Next Edit Clear Enterprise-Specific Trap Definitions Trap Value Event Access Next Read R/WSnmp Traps Newname Up Down Save Num Trap Mgrs1 Next Selecting the Number of Trap Managers 23. Trap Options Screen Configuring an IP Address for Snmp Trap Manager Trap n IP Adr Next Edit Clear Configuring DS0 Channels 24. Example Channel Allocation 25. Example Interface Tables Network T1 Interface Network Channel Allocation 26. DS0 Channels Containing RBS Information Worksheet DTE Chan Assign Voice Config N1 ± RBS or Data NET, DTE Port Chan Options Value Conf Port Chan Options Value Conf Edit Port NET Chan Display Channel Symbols MeaningChannel Config Dsply Clear DTE Displaying DS0 Channel Assignments Prt1 Display ChanNET DTE Allocating Data Ports NET Block Channel Assignment Method Example Assign ByACAMI Next Block Acami Acami Channel Assignment Method ExamplePort Rate384 Next 64 Start AtClear Next Clear N1 Next Prt1 Prt2 Individual Channel Assignment Method ExampleAssign ByChan Block Acami Chan Assign ByChan Next Block Acami DTE Channels Assign Voice RBS 30. DTE Assignment Screen Clear Channel Clearing DS0 Channel Allocation Timing 32. Common Clocking Configurations Clock SrcNET Next NET DTE Configuring for Network Timing ExampleEdit NET Chan Gen GenYellowEnab Next Enab Disab Clock Rate1544 Next 2048 Configuring for External Timing ExampleClock SrcNET Prt1 Int Ext Self±TestEnab Next Enab Disab Selecting the Shared Communication Port101 MasterComDisab Next Enab Disab Checking the StatusDevice Health and Status Description Health and Status MessagesMessage Auto Dev H/S OOF at DTE Displaying Device Health and StatusSelf-Test Health Device H/S OOF at DTE STest Health Passed Displaying Self-Test ResultsSelf-Test Health Messages Message Description VldIntvl=xx CurTimerPerformance Report Event=xx,xxx StEvnt 35. Carrier Telco and User Register Organization Displaying User Performance Registers 36. Telco Performance Report Screen Clearing User Performance Registers LED Controlling the DSU/CSU DSU Fmt Acquiring/Releasing the Active Physical InterfaceAcquiring the Active Physical Interface Releasing the Active Physical Interface Ft. Panel Released Using the Integral ModemInitiating a Call for Front Panel Pass-Through Operation Dial n Up Down Dial Call Setup Pass Dial ChDirPass n Up Down Dial Passwd Up Down Done Entering a Password to Gain Access Call Setup Disc ChDir Disconnecting the Modem ConnectionDisconnecting Using the Disconnect Command Disconnecting Using Front Panel Keys Xxxxxxxxxxxxxxxxx Next Prev Edit Entering Numbers in the Phone Directories Valid Phone Number Characters Meaning Restrictions Xxxxxxxxxxxxxxxxx Up Down Save Control ACO Rel LED Deactivating the Alarm RelayAlarm Cut-Off Command Complete Starting Front Panel Emulation Setting Interface Options Using the Async Terminal Feature Async Terminal Menus and Screens Entering a PasswordActivating Interface Option Changes Initiating an Async Terminal Session Edit and Display Screens Menu Selection Screens Function Representations for Edit Screens Function Key Usage Hard-Key Representations for Edit Screens Usage Terminating a Session Troubleshooting Maintenance Interface Snmp Trap Meaning AlarmsSnmp Traps Snmp Trap per Interface Test Branch Test Commands Rem Loopback Remote Loopback TestsSending a Line Loopback Up or Down Test Rlpbk Lpbk Ptrns Rem Loop Type Prt1 Prt2 Prt3 Sending a V.54/ANSI FT1 Activation/DeactivationLocal Loopback Tests Loopback Abort LLB PLB Starting a Line LoopbackValid Loopback Combinations Starting a DTE Loopback Starting a Payload Loopback LLB PLB DLB Starting a Repeater LoopbackLoopback Loopback Dclb Prt1 Prt2 Prt3 Starting a Data Channel LoopbackPLB DLB RLB DLB RLB Dclb Loopback Dtlb Prt1 Prt2 Prt3 Starting a Data Terminal LoopbackRLB Dclb Dtlb LLB PLB DTE-initiated LoopbacksAborting Loopbacks Loopback Abort All Sending Test Patterns Test Patterns Monitor Name NET Prt1 Prt2 Monitoring Test Patterns8 Network Port Patterns Mon Qrss Patterns Abort All Send Mon Aborting Test PatternsLamp Test Starting a Lamp Test 0123456789 = ? Aborting a Lamp TestTest Lpbk Ptrns Lamp Lamp Test Abort Start Test Status Messages Displaying DSU/CSU Test Status Status STest Perf TStat Resetting the DSU/CSUDownloading Software Device Reset Yes No Control ClrUsr Reset Front Panel Menu a 3160-A2-GB22-10 Front Panel Menu Power Requirements Technical Specifications B Clocking Sources Power Consumption Dissipation Pounds .82 kg Functional Grouping Configuration Options C Context-Sensitive Menu DTE Interface Configuration OptionsTable C-1 DTE Interface Configuration Options Send Ones Enab Next Enab Disab Prev Extrn DLB Disab Next Enab Disab Prev Port Type E530 Factory Next E530 V.35 RS449 Prev Port Configuration OptionsPort Configuration Options Table C-2 Rcv Yellow Halt Next None Halt Prev Table C-2 Port Configuration OptionsAll Ones Both Next Disab DTR RTS Both Prev Invert Data Disab Next Enab Disab Prev Tx Clock Int Next Int Ext PrevInvert TxC Disab Next Enab Disab Prev Table C-3 Network Interface Configuration Options Network Interface Configuration Options Bit Stuff Next 62411 Part68 Disab Prev NET PLB Enab Next Enab Disab Prev Table C-4 DTE Channel Configuration Options Channel Configuration Options Table C-5 Data Port Channel Configuration Options N10 N11 N12 N24 Next Prev D10 D11 D12 D24 Start At Clear Next N10 N11 N24 Prev D10 D11 D24 Clock Src NET Next NET DTE Prt1 Int Ext Prev General Configuration OptionsTable C-6 General Configuration Options Gen Yellow Enab Next Enab Disab Prev Table C-7 User Interface Configuration Options User Interface Configuration Options Com Clk Int Next Int Ext Prev MasterComDisab Next Enab Disab PrevCom Use Ascii Next Snmp Ascii Term Prev Com Type Async Next Async Sync Prev CStop Bits Next 1 1.5 2 Prev Com Rate Next 1.2 2.4 4.8 9.6 14.4 19.2 PrevChar Length Next 7 8 Prev CParity None Next None Even Odd Prev MParity None Next None Even Odd Prev Modem Type Async Next Async Sync PrevModem Rate Next 1.2 2.4 Prev MChar Len Next 7 8 Prev Snmp Trap Disab Next Enab Disab Prev Alarm Configuration OptionsTable C-8 Alarm Configuration Options Alrm Msg Disab Next Disab Modem Com Both Prev Next None 1 2 3 4 5 Prev Dial Delay Next 1 2 3 4 5 6 7 8 9 10 PrevDialOut Disab Next Enab Disab Prev Call Retry Disab Next Enab Disab Prev AlrmRelay Disab Next Enab Disab Prev Err Rate 10E-4 Next 10E-4 10E-5 10E-6 10E-7 10E-8 10E-9 Prev Table C-9 General Snmp Configuration Options Snmp Configuration Options Modem IP Adr Clear Next Edit Clear Prev Access 2 Read Next Read R/W PrevCom IP Adr Clear Next Edit Clear Prev Com Link PPP Next PPP Slip Prev Gen Trap Both Next Disab Warm Auth Both Prev Table C-10 Snmp Trap Configuration OptionsNum Trap Mgrs Next 1 2 3 4 5 6 Prev Trap n IP Adr Clear Next Edit Clear Prev Trap I/F All Next NET DTE T1s Ports All Prev Link Trap Both Next Disab Up Down Both Prev Cables T1 Network Connector InterfacePin Assignments D Receiver Ring Receiver Tip Transmitter Ring Transmitter Tip RJ48C DA15P DSX-1 Port DTE Interface Integral Modem Service Port Interface AUX Port Interface COM Port Interface Figure D-5. COM Port-to-PC Cable Feature Number 3100-F1-550 Acculink 316x DSU/CSU Direction Pin Mnemonic Number EIA-530A DB25 Port Interface ConnectorTable D-7 EIA-530A Port Interface Connector Signal Circuit Table D-8 RS449 Port Interface Connector Signal Circuit RS449 Port Interface Connector Pin Assignments Direction Pin Number Port Interface ConnectorTable D-9 Port Interface Connectors Signal Pin Assignments Table D-10 DC Power Connector Signal Pin Number Power CablePower Input Connector External Clock Connector Slide Latch Adapter Figure D-11. The connector information is in Table D-12 Snmp MIB Objects E System Group Supported Management Information Base MIB II RFC System Group ± ªsysObjectIDº Object system System Group ± ªsysServicesº Object systemSystem Group, MIB System Group ± ªsysDescrº Object system Interface Group ± ªifMtuº Object ifEntry Interface Group, MIBInterface Group ± ªifDescrº Object ifEntry Interface Group ± ªifTypeº Object ifEntry DTE Interface Group ± ªifAdminStatusº Object ifEntry IP Group, MIB IP Group ± ªipNetToMediaTableº Object ipIcmp Group, MIB UDP Group, MIB DS1/E1 MIB RFC Near End Group ± ªdsx1SignalModeº Object dsx1ConfigEntry Near End Group ± ªdsx1SendCodeº Object dsx1ConfigEntryNear End Group ± ªdsx1LineStatusº Object dsx1ConfigEntry Near End Group ± ªdsx1Fdlº Object dsx1ConfigEntry DS1 Fractional Group, DS1/E1 MIB RS-232-like MIB RFCNear End Group ± The DS1 Total Table Objects dsx1TotalEntry Far End Group, DS1/E1 MIB General Port Table ± ªrs232PortTypeº Object rs232PortEntry Number of Ports ± ªrs232Numberº Object rs232General Port Table, RS-232-like MIB General Port Table ± ªrs232PortIndexº Object rs232PortEntry Input Signal Table ± ªrs232InSigChangesº rs232InSigEntry Input Signal Table, RS-232-like MIBInput Signal Table ± ªrs232InSigNameº rs232InSigEntry Input Signal Table ± ªrs232InSigStateº rs232InSigEntry Generic-Interface MIB Extensions RFC Output Signal Table ± ªrs232OutSigNameº rs232OutSigEntryOutput Signal Table ± ªrs232OutSigStateº rs232OutSigEntry Output Signal Table ± ªrs232OutSigChangesº rs232OutSigEntry Acculink 316x DSU/CSU Yellow at Net Troubleshooting Table FTable F-1 Troubleshooting Symptom Possible Cause Solutions AIS at DTE Yellow at DTEAIS at Net Configuration Worksheets G Net Value Options DTE Configuration Worksheets Network T1 Interface Network Channel Allocation D10 D11 D12 D13 D14 D15 D16 D17 D18 D19 D20 D21 D22 D23 D25 Acami Port Chan Options Value Conf Snmp Gen Value Options Alarm Value OptionsGeneral Options Value User Options Value Cable numbers for DSU/CSU are located Equipment Feature NumberEquipment List H PEC Code AIS Glossary EER Index DTE Index Index-4