Manuals / Paradyne / Computer Equipment / Modem

Paradyne 316x manual Starting a Data Channel Loopback

Models: 316x

1 211

Download 211 pages 11.69 Kb

Page 125

Starting a Data Channel Loopback

Maintenance

4. Press F3 to select RLB.

Loopback:

PLB DLB RLB

F1 F2 F3

Test Started appears on Line 2. If a Repeater loopback is already in progress, the Already Active message appears. If an invalid combination of loopbacks is in progress, the error message Invalid Test Combo appears (see Table4-2 for valid loopback test combinations).

Starting a Data Channel Loopback

The Data Channel loopback command (DCLB) loops the data received from the network interface, for all DS0 channels allocated to the selected port, back to the network. The loopback occurs after the data passes through the port circuitry but before it is sent out the data port.

To perform a Data Channel loopback,

1.Press F2 to select Test from the top-level menu screen.

DSU ESF

Stat Test Cnfig

F1 F2 F3

2. From the Test screen, press F2 to select Lpbk.

Test:

Rlpbk Lpbk Ptrns

F1 F2 F3

3.From the Loopback screen, press three times to display the DCLB selection on the screen.

Loopback:

Abort LLB PLB

F1 F2 F3

4. Press F3 to select DCLB.

Loopback:
DLB	RLB	DCLB
F1	F2	F3

5.From the DCLB screen, press the function key for the port for which you want to perform the data channel loopback. Use the scroll keys, if necessary.

Loopback: DCLB

Prt1	Prt2	Prt3
F1	F2	F3

Test Started appears on Line 2. If a Data Channel loopback is already in progress, the Already Active message appears. If an invalid combination of loopbacks is in progress, the error message Invalid Test Combo appears (see Table 4-2 for valid loopback test combinations).

3160-A2-GB22-10

December 1996

4-9

Image 125

Paradyne 316x manual Starting a Data Channel Loopback

Contents

Document No. 3160-A2-GB22-10 OPERATORS GUIDEACCULINK 316x DATA SERVICE UNIT CHANNEL SERVICE UNIT INCLUDES TERMINAL USER INTERFACE316x Data Service Unit/Channel Service Unit Warranty, Sales, and Service InformationACCULINK TrademarksImportant Safety Instructions ACCULINK 316x DSU/CSU NoticesCC DGD D C G C D CC D DUnited States Government Requirements and Equipment ReturnNOTICE TO USERS OF THE UNITED STATES TELEPHONE NETWORK 316x DSU/CSU Facility Interface CodesNOTICE TO USERS OF THE CANADIAN TELEPHONE NETWORK CanadaPage 2. Installation Table of ContentsPreface 1. Introduction3. Operation 4. MaintenanceGlossary Index AppendicesMultiport T1 DSU/CSU in a Fractional T1 Network Configuration Example Shared Access to Network-Based Services ConfigurationList of Figures Front Panel Emulation Screen Models 3160/3164 DSU/CSUsExample Port Channel Configuration Tables Ports 3 and 4 Worksheet Example Port Channel Configuration Tables Ports 1 and 2 WorksheetIntegral Modem Cable Feature Number 3150-A1-210 COM Port-to-PC Cable Feature Number 3100-F1-550ACCULINK Models 3160/3164 DSU/CSUs Technical Specifications Models 3160/3614 DSU/CSUs Rear Panel ConnectorsACCULINK Model 3161 DSU/CSU Technical Specifications List of TablesD-1 T1 Network Interface Connector J4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-2 D-2 T1 Network Interface Connector DA15P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-3 D-3 DSX-1 DTE Interface Connector J3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-4 D-4 Integral Modem Service Port Connector J5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-5 D-5 Extended Management Port Connector J7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-6 D-6 COM Port Connector J6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-8 D-7 EIA-530A Port Interface Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-9 D-8 RS449 Port Interface Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-10 D-9 V.35 Port Interface Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-12 D-10 DC Power Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-14 D-11 External Clock Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-15 D-12 Slide Latch Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-16 Central Office Power Unit Carrier Installation ManualInstallation Guide PrefaceOverview IntroductionAlarm Interface FeaturesIntegral Modem User InterfaceFront Panel Emulation Front Panel Access Control FeatureFront Panel Pass-Through Async Terminal Interface SupportStandalone Model 3160/3164 DSU/CSUs ACCULINK 316x DSU/CSU Physical Description3160/3164 DSU/CSU Front Panel 3160/3164 DSU/CSU Rear PanelACCULINK Figure 1-1. 3160 DSU/CSU Front PanelFigure 1-2. 3164 DSU/CSU Front Panel ACCULINKFigure 1-4. 3164 DSU/CSU Rear Panel Figure 1-3. 3160 DSU/CSU Rear PanelACCULINK 316x DSU/CSU DecemberFunction Models 3160/3164 DSU/CSUs Rear Panel ConnectorsConnector Name Carrier-Mounted Model 3161 DSU/CSU Auxiliary Backplane ConnectorsModel 3161 Front Panel Functions Model 3161 DSU/CSU Rear PanelIntroduction Figure 1-6. Auxiliary Backplane3160-A2-GB22-10 DecemberOverview InstallationPlanning SERVICES Figure 2-1. Example Point-to-Point ConfigurationNETWORK In addition, a 3160 DSU/CSU, acting as an SNMP agent, can be connected to and managed from an SNMP management system in one of two waysFRACTIONAL T1 Figure 2-4. Central-Site T1 Termination ConfigurationInstallation NETWORKFigure 2-6. Serial Connection through a Router to SNMP Figure 2-5. Serial Connection to SNMPACCULINK 316x DSU/CSU DecemberQuick Start Procedure Box ContentsHANDLING PRECAUTIONS FOR STATIC-SENSITIVE DEVICES One ACCULINK 3160/3164 DSU/CSU Reference CardFigure 2-7. +24 Vdc Power Supply Pinouts Optional Power SelectionInstalling the +24 Vdc Power Supply Figure 2-8. ±48 Vdc Single Source Power Supply Pinouts Installing the Single ±48 Vdc Power SupplyFigure 2-9. ±48 Vdc Redundant Source Power Supply Pinouts Installing the Redundant ±48 Vdc Power SupplySelf-Test In Progress Power-Up Self-TestSelf-Test Passed Self-Test Failed nnnnnnnnFigure 2-10. Health and Status Results Screen Selecting a Model DSU/CSUDSU/CSU Identity 4. The following screens appear in the order listed Figure 2-11. Setting the Password Option Establishing Access Security on a PortSetting/Changing a Password main/control/miscellaneous Figure 2-12. Password Configuration Screen3160/3164 DSU/CSU Cabling Installation Figure 2-13. 3160/3164 DSU/CSU Cabling Configurations3160-A2-GB22-10 DecemberInstalling Front Panel Emulation Software Factory Default Configuration OptionsDo you want to overwrite the directory? appears 6. PRESS ENTEREnabling/Disabling the Front Panel 3160/3164 DSU/CSU User Interface Access Security Changing User Interface Access Security Operation Controlling the DSU/CSU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-61 Acquiring/Releasing the User Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-62 Acquiring the Active Physical Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-62 Releasing the Active Physical Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-62 Using the Integral Modem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-63 Initiating a Call for Front Panel Pass-Through Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-63 Initiating a Call for PC, ASCII Terminal/Printer, Async Terminal, or SNMP Operation . . . . . . . 3-64 Entering a Password to Gain Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-65 Disconnecting the Modem Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-66 Disconnecting Using the Disconnect Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-66 Disconnecting Using Front Panel Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-66 Entering Numbers in the Phone Directories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-67 Deactivating the Alarm Relay Figure 3-1. 3160 DSU/CSU Front Panel Operating the Front PanelFigure 3-2. Model 3161 DSU/CSU Faceplate Figure 3-3. Shared Diagnostic Control Panel SDCPINDICATORS OK Alarm BckUp TestOther Displays Device Health and Status MessagesContext-Sensitive Menu KeypadFigure 3-6. LEDs LEDsName System LEDsColor MeaningName NETWORK Interface LEDsColor MeaningName DSX-1 Drop/Insert Port LEDsColor MeaningName Data Port LEDsColor MeaningDisplaying LED Conditions on the Front Panel Figure 3-7. LED Status Screen Selecting the DSX-1 or a Port for LED DisplayFigure 3-8. LED Display Selection Screen Front Panel Emulation on a PCFigure 3-9. Front Panel Emulation Screen Models 3160/3164 DSU/CSUs Figure 3-10. Front Panel Emulation Screen Model 3161 DSU/CSUFront Panel Emulation Screen Icons Test JacksIcon Figure 3-11. 3160/3164 DSU/CSU Test JacksFigure 3-12. 3161 DSU/CSU Test Jacks Figure 3-13. Test Jack Block DiagramOperation 3160-A2-GB22-10Configuration Option Areas Configuring the DSU/CSUConfiguration Options Test Jack FunctionsFigure 3-14. Configuration Branch for the Front Panel Configuration ProceduresOperation 3160-A2-GB22-10Figure 3-15. Configuration Branch for the Async Terminal Displaying/Editing Configuration OptionsFigure 3-17. Save To Screen Figure 3-16. Load From Screenmain/configuration main/configuration/loadSaving Edit Changes Figure 3-18. Save Edit screen Selecting/Copying to a Specific PortSelecting a Specific Port Prt1 Figure 3-19. Port Options Configuration WorksheetsValue OptionsTo Copy to One or All Ports Figure 3-20. SNMP System Options Screen Configuring the 3160/3164 DSU/CSU for SNMP ManagementSelecting the Port DSU ESF Stat Test Cnfig Figure 3-21. Edit User Screen Setting the IP AddressDSU ESF Stat Test Cnfig Figure 3-22. Communication Port Options Screen Selecting the Link Layer ProtocolSpecifying the Community Names and Access Types Load from Enterprise-Specific Trap Definitions SNMP TrapsTrap Value EventSelecting the Number of Trap Managers Figure 3-23. Trap Options Screen Configuring an IP Address for SNMP Trap ManagerTrap n IP Adr Next Edit Clear Configuring DS0 ChannelsOperation Figure 3-24. Example Channel Allocation3160-A2-GB22-10 DecemberNetwork Channel Network T1 InterfaceAllocation DSX-1 DTE Drop/Insert T1 InterfaceDTE Chan ConfigAssign VoiceConf Port ChanOptions ValueOptions Port ChanValue ConfSymbol Display Channel SymbolsDisplaying DS0 Channel Assignments MeaningCustomer ID New Cust Figure 3-29. Display Channels Screenmain/configuration/edit/channel/display DSU ESF Stat Test Cnfig Allocating Data PortsLoad from ActivBlock Channel Assignment Method Example Port Rate384 Next 64 ACAMI Channel Assignment Method ExampleStart AtClear Next Clear N1 Assign ByBlock Next Block ACAMIIndividual Channel Assignment Method Example Load from Figure 3-31. DTE Voice Assignment Screen Figure 3-30. DTE Assignment ScreenClearing DS0 Channel Allocation Differences Using the Async Terminal To clear DS0Timing Figure 3-32. Common Clocking ConfigurationsConfiguring for Network Timing Example Configuring for External Timing Example Selecting the Shared Communication Port Device Health and Status Checking the Status of the DSU/CSUFigure 3-33. Status Branch Figure 3-34. Async Terminal Status BranchDescription Health and Status MessagesMessage Self-Test Health Displaying Device Health and StatusSelf-Test Health Messages Displaying Self-Test ResultsMessage Description1 of Performance Registers Performance ReportRegister Interval DescriptionFigure 3-35. Carrier Telco and User Register Organization 2 of Performance RegistersRegister Interval DescriptionDisplaying User Performance Registers Figure 3-36. Telco Performance Report Screen Clearing User Performance RegistersFigure 3-37. User Performance Report Screen ACCULINK 316x DSU/CSUFigure 3-39. Control Branch for the Async Terminal Controlling the DSU/CSUFigure 3-38. Control Branch Acquiring the Active Physical Interface Acquiring/Releasing the Active Physical InterfaceReleasing the Active Physical Interface User I/F activeInitiating a Call for Front Panel Pass-Through Operation Using the Integral ModemPage Figure 3-40. Call Setup Screen Entering a Password to Gain AccessDisconnecting Using Front Panel Keys Disconnecting the Modem ConnectionDisconnecting Using the Disconnect Command Figure 3-41. Disconnect Screen Entering Numbers in the Phone DirectoriesValid Characters Valid Phone Number CharactersRestrictions to a lower digit. The key inserts blanksStarting Front Panel Emulation Deactivating the Alarm RelaySetting Interface Options Using the Async Terminal FeatureAsync Terminal Interface Configuration Options COM Port ConnectionFigure 3-42. Password Access Screen Entering a PasswordActivating Interface Option Changes Initiating an Async Terminal SessionEdit and Display Screens Menu Selection ScreensTo return to the top-level menu from any screen To terminate a session from any screen, enter Ctrl-xUsage Hard-Key Representations for Edit ScreensFunction Representations for Edit Screens Function KeyFunction Representations for Display Screens Terminating a SessionFunction Key UsageOverview MaintenanceTroubleshooting Continuous Loss Of Signal at the x Interface AlarmsAlarm Cleared. Loss of Signal condition at the x Interface Alarm Clear. Out of Frame condition at the x InterfaceFigure 4-2. Test Branch for Async Terminal Test CommandsFigure 4-1. Test Branch Sending a Line Loopback Up or Down Remote Loopback TestsFor Networks For ChannelsLocal Loopback Tests Sending a V.54/ANSI FT1 Activation/DeactivationValid Loopback Combinations Starting a Line LoopbackDCLB DTLBStarting a DTE Loopback Starting a Payload LoopbackDSU ESF Stat Test Cnfig Test Rlpbk Lpbk PtrnsStarting a Repeater Loopback Starting a Data Channel Loopback HANDLING PRECAUTIONS FOR STATIC-SENSITIVE DEVICES Starting a Data Terminal LoopbackAbort Test Name DTE-initiated LoopbacksAborting Loopbacks Send Name and Dest Test PatternsSending Test Patterns Valid Send Test Pattern Combinations Monitoring Test PatternsQRSS Network QRSS PortLamp Test Aborting Test PatternsStarting a Lamp Test Abort Send or MonAborting a Lamp Test Test Status Messages Displaying DSU/CSU Test StatusMessage DescriptionDownloading Software Resetting the DSU/CSU4. Press F2 to select Reset December Front Panel Menu A3160-A2-GB22-10 3160-A2-GB22-10 ACCULINK 316x DSU/CSUDecember December Front Panel Menu3160-A2-GB22-10 ACCULINK Models 3160/3164 DSU/CSUs Technical Specifications Technical Specifications BSpecifications Table B-1 1 ofACCULINK Models 3160/3164 DSU/CSUs Technical Specifications Table B-1 2 ofSpecifications PHYSICAL DIMENSIONSSpecifications Table B-2 1 of ACCULINK Model 3161 DSU/CSU Technical SpecificationsPOWER REQUIREMENTS POWER CONSUMPTION ANDSpecifications Table B-2 2 of ACCULINK Model 3161 DSU/CSU Technical SpecificationsWEIGHT CriteriaDTE Interface Configuration Options Configuration Options CPort Configuration Options Network Interface Configuration OptionsTable C-1 1 of DTE Interface Configuration Options DTE Interface Configuration OptionsContext-Sensitive Menu DTE Port Enab Next Enab Disab PrevSend Ones Enab Next Enab Disab Prev Table C-1 2 of DTE Interface Configuration OptionsExtrn DLB Disab Next Enab Disab Prev Port Configuration Options Port Configuration Options1 of Table C-2Port LB Disab Factory 1 Both Factory Next Disab DTLB DCLB Both Prev Table C-2 2 of Port Configuration OptionsAll Ones Both Next Disab DTR RTS Both Prev Rcv Yellow Halt Next None Halt PrevTx Clock Int Next Int Ext Prev Table C-2 3 of Port Configuration OptionsInvert TxC Disab Next Enab Disab Prev Invert Data Disab Next Enab Disab PrevTable C-3 1 of Network Interface Configuration Options Network Interface Configuration OptionsNET Framing ESF Factory 1 D4 Factory Next D4 ESF Prev NET Coding B8ZS Factory 1 AMI Factory Next AMI B8ZS PrevBit Stuff Next 62411 Part68 Disab Prev Table C-3 2 of Network Interface Configuration OptionsNET PLB Enab Next Enab Disab Prev Table C-4 DTE Channel Configuration Options Channel Configuration OptionsDTE Channels Assign Voice Value MeaningPrt1, 2, 3, or Table C-5 1 of Data Port Channel Configuration OptionsAssign To NET Next NET DTE Prev Assign By Block Next Block ACAMI Chan PrevStart At Clear Table C-5 2 of Data Port Channel Configuration OptionsNext ClearTable C-6 General Configuration Options General Configuration OptionsGen Yellow Enab Next Enab Disab Prev Clock Src NET Next NET DTE Prt1 Int Ext PrevTable C-7 1 of User Interface Configuration Options User Interface Configuration OptionsFP Access Enab Next Enab Disab Prev Password None Next None Modem Com Both PrevMasterComDisab Next Enab Disab Prev Table C-7 2 of User Interface Configuration OptionsCom Use ASCII Next SNMP ASCII Term Prev Com Type Async Next Async Sync PrevCom Rate Next 1.2 2.4 4.8 9.6 14.4 19.2 Prev Table C-7 3 of User Interface Configuration OptionsChar Length Next 7 8 Prev CParity None Next None Even Odd PrevModem Type Async Next Async Sync Prev Table C-7 4 of User Interface Configuration OptionsModem Rate Next 1.2 2.4 Prev MChar Len Next 7 8 PrevTable C-8 1 of Alarm Configuration Options Alarm Configuration OptionsAlrm Msg Disab Next Disab Modem Com Both Prev SNMP Trap Disab Next Enab Disab PrevDialOut Disab Next Enab Disab Prev Table C-8 2 of Alarm Configuration OptionsCall Retry Disab Next Enab Disab Prev Dial Delay Next 1 2 3 4 5 6 7 8 9 10 PrevAlrmRelay Disab Next Enab Disab Prev Table C-8 3 of Alarm Configuration OptionsErr Rate 10E-4 Next 10E-4 10E-5 10E-6 10E-7 10E-8 10E-9 Prev Table C-9 1 of General SNMP Configuration Options SNMP Configuration OptionsAccess 1 Read Next Read R/W Prev System Name Clear Next Edit Clear PrevAccess 2 Read Next Read R/W Prev Table C-9 2 of General SNMP Configuration OptionsCom IP Adr Clear Next Edit Clear Prev Com Link PPP Next PPP SLIP PrevNum Trap Mgrs Next 1 2 3 4 5 6 Prev Table C-10 1 of SNMP Trap Configuration OptionsTrap n IP Adr Clear Next Edit Clear Prev Gen Trap Both Next Disab Warm Auth Both PrevTrap I/F All Next NET DTE T1s Ports All Prev Table C-10 2 of SNMP Trap Configuration OptionsLink Trap Both Next Disab Up Down Both Prev Cables T1 Network Connector InterfacePin Assignments D Signal Table D-1 T1 Network Interface Connector J4Pin Number ACCULINK 316x DSU/CSURJ48C Table D-2 T1 Network Interface Connector DA15PDA15P SignalDSX-1 Port DTE Interface Figure D-3. DSX-1 Cable Table D-3 DSX-1 DTE Interface Connector J3Signal Pin NumberFigure D-4. Integral Modem Cable Feature Number 3150-A1-210 Table D-4 Integral Modem Service Port InterfaceIntegral Modem Service Port Connector J5 SignalAUX Port Interface Table D-5 Extended Management Port Connector J7Direction SignalCOM Port Interface Figure D-5. COM Port-to-PC Cable Feature Number 3100-F1-550Signal Table D-6 COM Port Connector J6Direction Pin NumberTable D-7 EIA-530A Port Interface Connector EIA-530A DB25 Port Interface ConnectorCircuit CCITTTable D-8 RS449 Port Interface Connector RS449 Port Interface ConnectorSignal Circuit3160-A2-GB22-10 Pin AssignmentsDecember D-11Table D-9 V.35 Port Interface Connectors V.35 Port Interface ConnectorSignal CCITTPin Assignments Figure D-8. EIA-530A to V.35 Adapter Cable Feature Number 3100-F1-5703160-A2-GB22-10 DecemberPower Input Connector Power CableFigure D-9. DC Power Cable Feature Number 3100-F1-520 Table D-10 DC Power ConnectorFigure D-10. External Clock Connector Table D-11 External Clock ConnectorExternal Clock Connector SignalTable D-12 Slide Latch Connector Figure D-11. Slide Latch Adapter Cable Feature Number 3100-F1-560Slide Latch Adapter DA15SSNMP MIB Objects E RS- 232-like MIB RFC Management Information Base MIB II RFCNumber of Ports ± ªrs2 32Numberº Object rs232 System Group SupportedSystem Group, MIB System Group ± ªsysServicesº Object systemSystem Group ± ªsysDescrº Object system System Group ± ªsysObjectIDº Object systemInterface Group ± ªifDescrº Object ifEntry Interface Group, MIBInterface Group ± ªifTypeº Object ifEntry Interface Group ± ªifMtuº Object ifEntryInterface Group ± Input Counters objects ifEntry 10 to ifEntry Interface Group ± ªifAdminStatusº Object ifEntryIP Group ± ªipNetToMediaTableº Object ip Interface Group ± Output Counters objects ifEntry 16 to ifEntryICMP Group, MIB UDP Group, MIBNear End Group ± ªdsx1ValidIntervalsº Object dsx1ConfigEntry Near End Group ± ªdsx1TimeElapsedº Object dsx1ConfigEntryNear End Group ± ªdsx1LineTypeº Object dsx1ConfigEntry Near End Group ± ªdsx1LineCodingº Object dsx1ConfigEntryNear End Group ± ªdsx1CircuitIdentifierº Object dsx1ConfigEntry Near End Group ± ªdsx1SendCodeº Object dsx1ConfigEntryNear End Group ± ªdsx1LoopbackConfigº Object dsx1ConfigEntry Near End Group ± ªdsx1LineStatusº Object dsx1ConfigEntryNear End Group ± ªdsx1Fdlº Object dsx1ConfigEntry Near End Group ± ªdsx1TransmitClockSourceº Object dsx1ConfigEntryNear End Group ± The DS1 Current Table Objects dsx1CurrentEntry Near End Group ± The DS1 Interval Table Objects dsx1IntervalEntryNear End Group ± The DS1 Total Table Objects dsx1TotalEntry RS-232-like MIB RFCFar End Group, DS1/E1 MIB The DS1 Fractional Group, DS1/E1 MIBGeneral Port Table, RS-232-like MIB Number of Ports ± ªrs232Numberº Object rs232General Port Table ± ªrs232PortIndexº Object rs232PortEntry General Port Table ± ªrs232PortOutSigNumberº Object rs232PortEntryInput Signal Table ± ªrs232InSigNameº rs232InSigEntry Input Signal Table, RS-232-like MIBInput Signal Table ± ªrs232InSigStateº rs232InSigEntry Input Signal Table ± ªrs232InSigChangesº rs232InSigEntryOutput Signal Table ± ªrs232OutSigStateº rs232OutSigEntry Output Signal Table ± ªrs232OutSigNameº rs232OutSigEntryOutput Signal Table ± ªrs232OutSigChangesº rs232OutSigEntry Generic-Interface MIB Extensions RFCGeneric Interface Test Table ± ªifExtnsTestResultº Object ifExtnsTestEntry Table F-1 1 of Troubleshooting Troubleshooting Table FSymptom SolutionsSymptom Table F-1 2 of TroubleshootingSolutions Possible CauseDecember Configuration Worksheets G3160-A2-GB22-10 Options ValueValue OptionsValue Prt1Options Prt2Network Channel Network T1 InterfaceAllocation DSX-1 DTE Drop/Insert T1 InterfaceDTE Chan ConfigAssign VoiceOptions Port ChanValue ConfOptions Port ChanValue ConfGeneral Options AlarmUser Options SNMP Gen3000 Series Carrier Installation Feature NumberEquipment List H EquipmentAsync Terminal GlossaryAuxiliary Backplane B8ZSLOFC Yellow AlarmPSTN QRSSIndex Page