Paradyne 316x manual Block Channel Assignment Method Example

Operation

3. Press F1 to select Edit.

Choose Funct:

Edit Save

F1 F2 F3

4.Press the key from the Edit screen to display the Chan selection.

Edit:

DTE Port NET

F1 F2 F3

5. Press F3 to select Chan.

Edit:DTE
Port	NET	Chan
F1	F2	F3

6.From the Channel Config screen, press the key to scroll the ports onto the screen.

Channel Config:

Dsply Clear DTE

F1 F2 F3

7.Select the desired port by pressing its corresponding Function key.

Channel Config:

Prt1	Prt2	Prt3
F1	F2	F3

8.The configuration option for the data port channel allocation destination appears on the screen. Press F2 (NET) to assign this port to the Network T1 interface, or F3 (DTE) to assign this port to the DSX-1 Drop/Insert T1 interface.

Assign To:NET

Next NET DTE

F1 F2 F3

9.Press F1 (Next) to display the appropriate configuration options on the screen. Use one of the following examples, depending on whether you are assigning by block, ACAMI, or i.

Differences Using the Async Terminal: To allocate data ports, choose a port selection from the main/ configuration/edit/channel menu. From these screens, you can specify whether the assignment is by block, ACAMI, or individual port.

Block Channel Assignment Method Example

To assign by the block method,

1.The Assign By configuration option screen appears after you select a port. To assign by block, press F2 (Block).

Assign By:Block

Next Block ACAMI

F1 F2 F3

2.Press F1 (Next) to display the next configuration option (Port Rate).

Assign By:

Next Block ACAMI

F1 F2 F3

3160-A2-GB22-10 December 1996 3-43