Paradyne 316x manual Edit User Alarm, Snmp Config Gen Trap, System Name Next Edit Clear

Operation

To assign an IP address to the MODEM port,

1.Press F3 to select Cnfig from the top-level menu screen.

DSU ESF

Stat Test Cnfig

F1 F2 F3

2.Select the configuration option set to be copied into the Edit area by using the appropriate function key. Use the scroll keys, if necessary.

Load from:
Activ	Cust	Fact1
F1	F2	F3

3. Press F1 to select Edit.

Choose Funct:

Edit Save

F1 F2 F3

4.Press the key from the Edit screen to display the SNMP selection.

Edit:

DTE Port NET

F1 F2 F3

5. Press F3 to select SNMP.

Edit:
User	Alarm	SNMP
F1	F2	F3

6.Press F1 to select Gen from the SNMP Config screen.

SNMP Config:

Gen Trap

F1 F2 F3

7.Press the F1 (Next) key until the Modem IP Adr configuration option appears.

System Name:

Next Edit Clear

F1 F2 F3

NOTE

Steps 8 and 9 describe the process for entering an IP address. This process applies to any IP address.

8.Press F2 (Edit) to edit the IP address. You have the option of using F3 (Clear) to reset the IP address to the factory default 000.000.000.000.

Modem IP Adr:

Next Edit Clear

F1 F2 F3

3160-A2-GB22-10 December 1996 3-27