Paradyne 316x Table C-4 DTE Channel Configuration Options, DTE Channels Assign Voice, Value

Configuration Options

Channel Configuration

Options

The Channel configuration options are divided into two tables as follows:

•DTE Channel Configuration Options (Table C-4)

•Data Port Channel Configuration Options (Table C-5)

Table C-4

DTE Channel Configuration Options

DTE Channels:

Assign Voice

DTE Drop/Insert Channel. Assigns DS0 channels from the DTE Drop/Insert T1 interface to DS0 channels on the Network T1 interface and specifies which DS0 channels carry voice signaling information.

Assign ± Assigns DS0 channels from the DTE Drop/Insert T1 interface to the Network T1 interface. This option is explained below.

Voice ± Specifies which DS0 channels from the DTE Drop/Insert T1 interface are voice channels and should pass Robbed Bit Signaling (RBS) information to the Network T1 interface. This configuration option is explained below.

N1

N2

N3

N4

N5

N6

N7

N8

N9

N10

N11

N12

N13

N14

N15

...

N24

±

±

±

±

±

±

±

±

±

±

±

±

±

±

±

...

±È

DTE Drop/Insert Channel Allocation. Assigns DS0 channels from the DTE Drop/Insert T1 interface to the Network T1 interface.

Line 1 displays the 24 channels for the Network T1 interface. Line 2 displays what is allocated to the DS0 channel indicated in Line 1. Possible values for Line 2 are:

Value Meaning

±This DS0 channel is not allocated. You can modify this value on this screen.

Prtn This DS0 channel is allocated to port n, where n is a number from 1 to 4. You cannot modify this value on this screen.

Dn This DS0 channel is allocated to DTE Drop/Insert T1 Interface DS0 channel n, where n is a number from 1 to 24. You can modify this value on this screen.

Assign DTE channels to Network channels by pressing the Function key below the Network channel desired. The DTE channel number scrolls up one number each time you press the Function key. Only unassigned DTE channels appear during scrolling.

D1

D2

D3

D4

D5

D6

D7

D8

D9

D10

D11

D12

D13

...

D24

RBS

RBS

RBS

RBS

RBS

RBS

RBS

RBS

RBS

RBS

RBS

RBS

RBS

...

RBS

Specify DTE Drop/Insert Voice Channels. Specifies which DS0 channels from the DTE Drop/Insert T1 interface are voice channels and should pass Robbed Bit Signaling information to the Network T1 interface.

Line 1 displays the 24 channels for the DTE Drop/Insert T1 interface. Line 2 displays whether the DS0 channel indicated in Line 1 is a voice or data channel. Possible values for Line 2 are:

Value	Meaning
RBS	This DS0 channel is a voice channel carrying RBS information. When this DS0 channel is assigned to a
	network DS0 channel, RBS information will be preserved across the connection.
Data	This DS0 channel is a data channel that does not contain RBS information. Signaling is not preserved
	across the connection.

Press the Function key below the desired channel to toggle between RBS and Data.

NOTE: If the DSX-1 Drop/Insert T1 interface is disabled, this configuration option will not appear.

3160-A2-GB22-10 December 1996 C-9