Paradyne 316x manual Selecting/Copying to a Specific Port, Selecting a Specific Port

Operation

To protect you from accidentally exiting an edit session before saving your changes, the system prompts Save Options? if you select either Main or Cntrl-xfrom an edit screen (see Figure 3-18). If you respond No, the system exits without saving the changes. If you respond Yes, you are prompted to specify where the changes should be saved.

Customer ID: New Cust	main/control/miscellaneous
	Model: ACCULINK XXXX

Miscellaneous Control Options

Customer Identification Name/Number: _____

Change Password: Yes

Password: _____

Re±enter Password: _____

Save Main Previous Cntrl±x to Disconnect

Figure 3-18. Save Edit screen

NOTE

If you terminate async terminal control by changing the configuration interface options, the async terminal must be reconfigured on the port.

Selecting/Copying to a Specific Port

You have the capability of selecting a specific port to configure and to copy the configuration options for one port to another port or to all ports. You can use the configuration worksheets provided to note the configuration options you have chosen (see Figure 3-19).

Selecting a Specific Port

To select a specific port to configure,

1.Press F3 to select Cnfig from the top-level menu screen.

DSU ESF

Stat Test Cnfig

F1 F2 F3

2.Select the configuration option set to be copied into the Edit area by using the appropriate function key. Use the scroll keys, if necessary.

Load from:
Activ	Cust	Fact1
F1	F2	F3

3. Press F1 to select Edit.

Choose Funct:

Edit Save

F1 F2 F3

4. Press F2 to select Port.

Edit:

DTE Port NET

F1 F2 F3

5.From the Port Select screen, press the Function key that corresponds to the desired port. Use the key to scroll addition ports onto the screen, if necessary.

Port Select:

Copy Prt1 Prt2

F1 F2 F3

3160-A2-GB22-10 December 1996 3-21