Paradyne 316x manual Load from

ACCULINK 316x DSU/CSU

2.Select the configuration option set to be copied into the Edit area by using the appropriate function key. Use the scroll keys, if necessary.

Load from:
Activ	Cust	Fact1
F1	F2	F3

3. Press F1 to select Edit.

Choose Funct:

Edit Save

F1 F2 F3

4.Press the key from the Edit screen to display the SNMP selection.

Edit:

DTE Port NET

F1 F2 F3

5. Press F3 to select SNMP.

Edit:
User	Alarm	SNMP
F1	F2	F3

6.Press F1 to select Gen from the SNMP Config screen.

SNMP Config:

Gen Trap

F1 F2 F3

7.Press the F1 (Next) key until the CommunityName1 configuration option appears.

System Name:

Next Edit Clear

F1 F2 F3

8.Press F2 (Edit) to edit the community name. The factory default community name is public.

CommunityName1:

Next Edit Clear

F1 F2 F3

NOTE

Steps 9 and 10 describe the process for entering text strings for SNMP configuration options. This process applies to entering any text strings into SNMP configuration options.

9.Use the and keys to position the cursor under the character you want to change. Press F1 (Up) or F2 (Down) to scroll through the valid numbers/characters for the text string. The valid characters consist of the set of printable ASCII characters. The F1 (Up) key scrolls through the ASCII character set in the following order: numbers (0±9), lowercase letters (a±z), uppercase letters (A±Z), space character, ASCII symbols (ascending order, based on ASCII code), and the

End of Line symbol (← ). The ← erases all characters to the right of the cursor.

public

Up Down Save

F1 F2 F3

3-30 December 1996 3160-A2-GB22-10