Paradyne 316x manual Entering a Password to Gain Access, 40. Call Setup Screen

Operation

6.When the number of the desired directory appears on the screen, press F3 (Dial) to place the call.

Differences Using the Async Terminal: To initiate a call at the local DSU/CSU, select Call Setup from the main/control menu. Figure 3-40 shows an example of the screen that appears.

Customer ID: New Cust	main/control/call_setup
	Model: ACCULINK XXXX
	Call Setup

Directory Number: _____

Directory Phone Number:

Dial

Main Previous Cntrl±x to Disconnect

Figure 3-40. Call Setup Screen

Enter the number for the phone directory and select Dial.

Entering a Password to Gain Access

You are prompted to enter a password (up to

8 characters) when you are dialing in to a device whose Set Password User Interface configuration option is set (see Appendix C, Configuration Options). The Password function is not available for Model 3161 DSU/CSUs since passwords are only used for modem connections and an integral modem is not available for 3161 DSU/CSUs.

Valid password characters are 0±9, a±z, A±Z, #, -, ., and /. The existing password is not shown on the screen. An underscore in the first position shows where to enter the first character. If the password is set to all null characters (default value), press F3 (Done) when the password screen first appears.

Create and modify passwords with the Password command in the Control branch of the front panel menu tree (see Chapter 2, Installation, for information about creating/modifying a password).

The following screen appears when you call a DSU/CSU that has a password enabled.

Passwd:

Up Down Done

F1 F2 F3

To complete a call when the remote DSU/CSU Set Password configuration option is enabled,

1.Use the and keys to position the cursor under the desired character. You must enter a

character before the key moves the cursor to

the next space to the right. The key is not destructive.

Passwd:

Up Down Done

F1 F2 F3

2.Enter the required password. Press F1 (Up) and F2 (Down) to scroll up and down through the valid characters/numbers for the password. You have five minutes to enter the correct password before the DSU/CSU disconnects and ends the session.

3.Press F3 (Done) to indicate you are done entering the password. If you enter an invalid password, the message Invalid Password appears and the call disconnects.

Passwd:

Up Down Done

F1 F2 F3

Differences Using the Async Terminal: See Entering a Password in the Using the Async Terminal Feature section for a description of the password sequence when using the async terminal.

3160-A2-GB22-10 December 1996 3-65