Paradyne 316x manual ACAMI Channel Assignment Method Example, Port Rate384 Next 64

ACCULINK 316x DSU/CSU

3.Use the or key to scroll the desired port rate onto the screen. Rates scroll in groups of three. Available selections depend on the current base rate selected for the port. Press the corresponding Function key to select the port rate. Then, select Next to display the Start At configuration option on the screen.

Port Rate:384

Next 64 128

F1 F2 F3

NOTE

For the 3164 DSU/CSU, there is a hardware limitation that limits the combined bandwidth used by Port1 and Port3 to a total of

2048 kbps, and the combined bandwidth used by Port2 and Port4 to 2048 kbps. Thus, the rate choices shall be limited appropriately due to this constraint. This limitation should only occur in configurations mapping a port to a port or when mapping ports to the DSX-1 and to the network.

4.The Start At screen displays the configuration option used to select the starting DS0 channel. If the destination selected is the Network T1 interface, then the Network channels appear on the screen. If the destination selected is the DSX-1 DSX-1 Drop/Insert T1 interface, then the these channels appear on the screen. The following screen shows an example of the Network T1

interface. Use the or key to scroll the desired channel onto the screen. Use the Function keys to select the starting channel. Only those DS0 channel numbers that provide enough bandwidth (based on the configured data rate) to be used as a starting channel number are displayed. Channel allocation for this port only can be cleared by selecting Clear.

Start At:Clear

Next Clear N1

F1 F2 F3

ACAMI Channel Assignment Method Example

The Assign By configuration option screen appears after you select a port. To assign by the ACAMI method,

1. Press F3 (ACAMI).

Assign By:Block

Next Block ACAMI

F1 F2 F3

2.Press F1 (Next) to display the next configuration option (Port Rate).

Assign By:ACAMI

Next Block ACAMI

F1 F2 F3

3.Use the or key to scroll the desired port rate onto the screen. Rates scroll in groups of three. Available selections depend on the current base rate selected for the port. Press the corresponding Function key to select the port rate. Then, select Next to display the Start At configuration option on the screen.

Port Rate:384

Next 64 128

F1 F2 F3

3-44 December 1996 3160-A2-GB22-10