Installation

To set a password,

1.Press the key on the top-level menu screen to bring the Ctrl branch onto the front panel LCD.

DSU ESF

Stat Test Cnfig

F1 F2 F3

2.Press F3 to select Ctrl from the top-level menu screen.

DSU ESF

Test Cnfig Ctrl

F1 F2 F3

3.Press the key on the Ctrl screen until the Passwd selection appears on the front panel LCD.

Control:

Call Rel LED

F1 F2 F3

4. Press F3 to select Passwd.

Control:

Reset CID Passwd

F1 F2 F3

5.Use the and keys to position the cursor under the desired character. You must enter a

character before the moves the cursor to the

next space to the right. The key is not destructive.

Passwd: _

Up Down Save

F1 F2 F3

6.Enter the desired password. Press F1 (Up) and F2 (Down) to scroll up and down through the valid characters/numbers for the password. Valid password characters are 0±9, a±z, A±Z, #, ±, ., and /.

Passwd: xxxxxxxx

Up Down Save

F1 F2 F3

7. Press F3 (Save) to save the password.

Passwd: xxxxxxxx

Up Down Save

F1 F2 F3

Differences Using the Async Terminal: To set the password, select miscellaneous/control/options in the main/control screen. This screen displays the prompt Change Password? If you enter yes, the screen displays the Password and Re-enter Password fields as shown in Figure 2-12.

Customer ID: New Cust

main/control/miscellaneous

Model: ACCULINK XXXX

Miscellaneous Control Options

Front Panel LED Display:_____

Customer Identification Name/Number:_____

Change Password? Yes

Password:_____

Re-enter Password:_____

Save Main Previous Cntrl±x to Disconnect

Figure 2-12. Password Configuration Screen

3160-A2-GB22-10

December 1996

2-13

Page 36
Image 36
Paradyne 316x manual Control Reset CID Passwd, Passwd Up Down Save